The influence of the laser spot size and the pulse number on laser-induced backside wet etching

被引：47
|
作者：
Böhme, R [1 ]
Zimmer, K [1 ]
机构：
[1] Leibniz Inst Oberflachenmodif eV, D-04318 Leipzig, Germany
来源：
APPLIED SURFACE SCIENCE | 2005年 / 247卷 / 1-4期
关键词：
excimer laser; laser etching; pulse number; laser spot size; etch rate;
D O I：
10.1016/j.apsusc.2005.01.058
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The laser-induced backside wet etching (LIBWE) of transparent solids at the interface to absorbing liquid is a new promising method for laser microstructuring. The influence of the laser spot size and the applied pulse number to the etch rate were investigated in detail for fused silica and two different liquids. Additional to the significant rise of the etch rate with increasing spot size considerable incubation effects have been observed at low laser fluences and pulse numbers. Based on the bubble formation during LIBWE processing, a relation between the bubble collapse time and the etch rate was ascertained. This relation fits the etch rate dependence on the spot size well. It is assumed that the deposition of decomposition products from the bubble accounts for the spot size influence the etch rate. (c) 2005 Elsevier B. V. All rights reserved.
引用
收藏
页码：256 / 261
页数：6
相关论文
共 50 条
  • [31] Transient pressure induced by laser ablation of liquid toluene: toward the understanding of laser-induced backside wet etching
    Kawaguchi, Y
    Ding, X
    Narazaki, A
    Sato, T
    Niino, H
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2004, 79 (4-6): : 883 - 885
  • [32] Transient pressure induced by laser ablation of liquid toluene: toward the understanding of laser-induced backside wet etching
    Y. Kawaguchi
    X. Ding
    A. Narazaki
    T. Sato
    H. Niino
    Applied Physics A, 2004, 79 : 883 - 885
  • [33] Microfabrication of a fluoropolymer film using conventional XeCl excimer laser by laser-induced backside wet etching
    Natl Inst of Materials and Chemical, Research, Ibaraki, Japan
    Jpn J Appl Phys Part 2 Letter, 7 A (L761-L763):
  • [34] Surface micro structuring of silica glass by laser-induced backside wet etching with a DPSS UV laser
    Niino, Hiroyuki
    Kawaguchi, Yoshizo
    Sato, Tadatake
    Narazaki, Aiko
    Kurosaki, Ryozo
    APPLIED SURFACE SCIENCE, 2007, 253 (19) : 8287 - 8291
  • [35] Microfabrication of a fluoropolymer film using conventional XeCl excimer laser by laser-induced backside wet etching
    Wang, J
    Niino, H
    Yabe, A
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1999, 38 (7A): : L761 - L763
  • [36] Effects of halogenated organic solvents on laser-induced backside wet etching of fused silica
    R. Böhme
    K. Zimmer
    Applied Physics A, 2006, 83 : 9 - 12
  • [37] Fabrication of Multiple Slanted Microstructures on Silica Glass by Laser-Induced Backside Wet Etching
    Sato, Tadatake
    Kurosaki, Ryozo
    Kawaguchi, Yoshizo
    Narazaki, Aiko
    Niino, Hiroyuki
    JOURNAL OF LASER MICRO NANOENGINEERING, 2010, 5 (03): : 256 - 262
  • [38] Effects of thermo-plasmonics on laser-induced backside wet etching of silicate glass
    Tsvetkov, M. Yu
    Yusupov, V. I.
    Minaev, N. V.
    Timashev, P. S.
    Golant, K. M.
    Bagratashvili, V. N.
    LASER PHYSICS LETTERS, 2016, 13 (10)
  • [39] Effects of halogenated organic solvents on laser-induced backside wet etching of fused silica
    Böhme, R
    Zimmer, K
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2006, 83 (01): : 9 - 12
  • [40] Laser induced backside wet and dry etching of solar glass by short pulse ytterbium fiber laser irradiation
    He Chao
    Liu Furong
    Wang Min
    Yuan Jianwen
    Chen Jimin
    JOURNAL OF LASER APPLICATIONS, 2012, 24 (02)
12345