INFLUENCE OF ANODE THICKNESS ON THE ELECTROCHEMICAL PERFORMANCE OF SINGLE CHAMBER SOLID OXIDE FUEL CELLS

被引:0
|
作者
Buergler, B. E. [1 ]
Santschi, Y. [1 ]
Felberbaum, M. [1 ]
Gauckler, L. J. [1 ]
机构
[1] ETH, Dept Mat, CH-8093 Zurich, Switzerland
来源
ADVANCES IN SOLID OXIDE FUEL CELLS II | 2007年 / 27卷 / 04期
关键词
D O I
暂无
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
The influence of the anode thickness (9-60 mu m) on the behaviour of SC-SOFCs was investigated in different total flows of a methane-air mixture to the anode. In order to eliminate the effects of the cathode with varying flow, a double chamber setup with separated fuel and air streams to the anode and cathode was used. The open circuit voltage (OCV) decreased with increasing gas flow and at the same time the power density increased. Oscillations of the OCV at high gas flows were observed for cells with thin anodes. Cells with thick anodes showed the highest OCV and the highest maximum power density. These anodes have a higher catalytic activity for the partial oxidation of methane and create a lower oxygen partial pressure at the anode/electrolyte interface. They also provide more hydrogen than thin anodes and can give a higher power output.
引用
收藏
页码:37 / 45
页数:9
相关论文
共 50 条
  • [41] The effect of anode support on the electrochemical performance of microtubular solid oxide fuel cells fabricated by gel-casting
    Morales, M.
    Laguna-Bercero, M. A.
    Navarro, M. E.
    Espiell, F.
    Segarra, M.
    RSC ADVANCES, 2015, 5 (49) : 39350 - 39357
  • [42] Electrochemical performance and thermal cyclicability of industrial-sized anode supported planar solid oxide fuel cells
    Luo, Jun
    Yan, Dong
    Fang, Dawei
    Liang, Fengli
    Pu, Jian
    Chi, Bo
    Zhu, Z. H.
    Li, Jian
    JOURNAL OF POWER SOURCES, 2013, 224 : 37 - 41
  • [43] Electrochemical performance of anode-supported intermediate temperature solid oxide fuel cells fed with hydrogen sulfide
    Tan, Wenyi
    Zhong, Qin
    Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2006, 34 (08): : 970 - 974
  • [44] Chemical and electrochemical performance of solid oxide fuel cells operating on solid carbon
    Shao, Zongping
    Wu, Yuzhou
    Su, Chao
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2010, 239
  • [45] Phase Inversion Tape Casting and Electrochemical Performance of Solid Oxide Fuel Cell Anode
    Zhang Yu-Yue
    Lin Jie
    Miao Guo-Shuan
    Gao Jian-Feng
    Chen Chu-Sheng
    Xia Chang-Rong
    Zhan Zhong-Liang
    Wang Shao-Rong
    JOURNAL OF INORGANIC MATERIALS, 2015, 30 (12) : 1291 - 1294
  • [46] Influence of anode thickness on the power output of solid oxide fuel cells with (La,Sr)(Co,Fe)-type cathode
    Menzler, Norbert H.
    Haanappel, Vincent A. C.
    JOURNAL OF POWER SOURCES, 2010, 195 (16) : 5340 - 5343
  • [47] Single-step fabrication of an anode supported planar single-chamber solid oxide fuel cell
    Sayan, Yunus
    Venkatesan, Vijay
    Guk, Erdogan
    Wu, Houzheng
    Kim, Jung-Sik
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2018, 15 (06) : 1375 - 1387
  • [48] Evaluation of electrode performances of single-chamber solid oxide fuel cells
    Hori, M
    Nagasaka, K
    Miyayama, M
    Trunfio, G
    Traversa, E
    ELECTROCERAMICS IN JAPAN VIII, 2006, 301 : 155 - 158
  • [49] Recent advances in single-chamber solid oxide fuel cells: A review
    Yano, Masaya
    Tomita, Atsuko
    Sano, Mitsuru
    Hibino, Takashi
    SOLID STATE IONICS, 2007, 177 (39-40) : 3351 - 3359
  • [50] Single chamber solid oxide fuel cells with integrated current-collectors
    Buergler, BE
    Siegrist, ME
    Gauckler, LJ
    SOLID STATE IONICS, 2005, 176 (19-22) : 1717 - 1722