The microstructure and hardness of molybdenum powders consolidated by plasma pressure compaction

被引：41
|
作者：
Srivatsan, TS [1 ]
Ravi, BG
Naruka, AS
Riester, L
Petraroli, M
Sudarshan, TS
机构：
[1] Univ Akron, Auburn Sci & Engn Ctr, Dept Mech Engn, Akron, OH 44325 USA
[2] Oak Ridge Natl Lab, High Temp Mat Lab, Mech Characterizat & Anal Grp, Oak Ridge, TN 37831 USA
[3] Timken Co, Timken Res, Canton, OH 44706 USA
[4] Mat Modificat Inc, Fairfax, VA 22031 USA
来源：
POWDER TECHNOLOGY | 2001年 / 114卷 / 1-3期
基金：
美国国家科学基金会;
关键词：
molybdenum; processing; microstructure; density; hardness;
D O I：
10.1016/S0032-5910(00)00285-0
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Bulk molybdenum samples were prepared by consolidating molybdenum powders using the technique of plasma pressure compaction ((PC)-C-2). The specimens were obtained by consolidating the powder particles under conditions of pulse and no-pulse and at two different temperatures. Results reveal that pulsing of the powders prior to consolidation had little influence on microhardness when compared to the samples that were obtained by consolidating the powder particles under no-pulse. Both nanohardness and microhardness measurements revealed a marginal decrease with an increase in temperature of compaction. The influence of processing variables on microstructural development and hardness is presented and discussed. (C) 2001 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：136 / 144
页数：9
相关论文
共 50 条
  • [41] Processing and microstructure of high-pressure consolidated ceramic nanocomposites
    Duan, RG
    Zhan, GD
    Kuntz, JD
    Kear, BH
    Mukherjee, AK
    SCRIPTA MATERIALIA, 2004, 51 (12) : 1135 - 1139
  • [42] Microstructure andmechanical properties of γ-TiAl consolidated by spark plasma sintering
    Kennedy, S.
    Kumaran, S.
    Rao, T. Srinivasa
    INTEGRATED FERROELECTRICS, 2017, 185 (01) : 11 - 15
  • [43] SOLID-PHASE COMPACTION OF POLYMERIC POWDERS - EFFECTS OF COMPACTION CONDITIONS ON PRESSURE AND DENSITY VARIATIONS
    CRAWFORD, RJ
    PAUL, DW
    SPREVAK, D
    POLYMER, 1982, 23 (01) : 123 - 128
  • [44] X-ray analysis of the dislocation structure of molybdenum produced by explosion compaction of powders
    Selivanov, V.N.
    Smyslov, E.F.
    Poroshkovaya Metallurgiya, 1994, (9-10): : 74 - 80
  • [45] Microstructure and Magnetron Sputtering Properties of Molybdenum Target Prepared by Low-Pressure Plasma Spraying
    Yueming Wang
    Qiuhao Tang
    Deqiang Chen
    Xiubo Liu
    Xiang Xiong
    Journal of Thermal Spray Technology, 2019, 28 : 1983 - 1994
  • [46] Microstructure and Magnetron Sputtering Properties of Molybdenum Target Prepared by Low-Pressure Plasma Spraying
    Wang, Yueming
    Tang, Qiuhao
    Chen, Deqiang
    Liu, Xiubo
    Xiong, Xiang
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, 28 (08) : 1983 - 1994
  • [47] THE MICROSTRUCTURE AND INTERFACE BEHAVIOR OF NI/NIAL COMPOSITES PRODUCED BY THE EXPLOSIVE COMPACTION OF POWDERS
    BYSTRZYCKI, J
    PASZULA, J
    TREBINSKI, R
    JOURNAL OF MATERIALS SCIENCE, 1994, 29 (23) : 6221 - 6226
  • [48] Effects of SiC on the Microstructure, Densification, Hardness and Wear Performance of TiB2 Ceramic Matrix Composite Consolidated Via Spark Plasma Sintering
    Samson D. Oguntuyi
    Mxolisi B. Shongwe
    Lerato Tshabalala
    Oluwagbenga T. Johnson
    Nicholus Malatji
    Arabian Journal for Science and Engineering, 2023, 48 : 2889 - 2903
  • [49] Effects of SiC on the Microstructure, Densification, Hardness and Wear Performance of TiB2 Ceramic Matrix Composite Consolidated Via Spark Plasma Sintering
    Oguntuyi, Samson D.
    Shongwe, Mxolisi B.
    Tshabalala, Lerato
    Johnson, Oluwagbenga T.
    Malatji, Nicholus
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2023, 48 (03) : 2889 - 2903
  • [50] KINETICS OF COMPACTION OF IODOSODALITE POWDERS WITH CONSTANT RATES OF HEATING AND CONSTANT PRESSURE
    DEMIDENKO, VA
    KNYAZEVA, LS
    VOLYNETS, FK
    INORGANIC MATERIALS, 1986, 22 (05) : 723 - 727
12345