An active zero-power control with a passive technique for vibration isolation system

被引：0
|
作者：
Hoque, Md Emdadul [1 ]
Mizuno, Takeshi [1 ]
Takasaki, Masaya [1 ]
Ishino, Yuji [1 ]
机构：
[1] Saitama Univ, Dept Engn Mech, Sakura Ku, 255 Shimo Okubo, Saitama 3388570, Japan
来源：
2006 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS 1-6 | 2006年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a vibration isolation system by using an active zero-power control incorporated with a passive technique. A positive stiffness spring is connected to a negative spring of equal magnitude in series to generate a high stiffness for on-board generated direct disturbances. The system is capable of isolating floor vibration as well due to the use of lower positive spring in the lower suspension. To reduce the load that the zero-power control system supports, a weight support mechanism is introduced. The proposed system paves the way for developing low cost vibration isolator with no power consumption in the steady-state. The mathematical model is analyzed such that it can generate infinite (high) stiffness for direct disturbance which is verified by experimental demonstrations.
引用
收藏
页码：1473 / +
页数：2
相关论文
共 50 条
  • [1] A modified zero-power control and its application to vibration isolation system
    Hoque, Md Emdadul
    Mizuno, Takeshi
    Ishino, Yuji
    Takasaki, Masaya
    [J]. JOURNAL OF VIBRATION AND CONTROL, 2012, 18 (12) : 1788 - 1797
  • [2] A six-axis hybrid vibration isolation system using active zero-power control supported by passive weight support mechanism
    Hoque, Md Emdadul
    Mizuno, Takeshi
    Ishino, Yuji
    Takasaki, Masaya
    [J]. JOURNAL OF SOUND AND VIBRATION, 2010, 329 (17) : 3417 - 3430
  • [3] Development of an Active Vibration Isolation System Using Linearized Zero-Power Control With Weight Support Springs
    Hoque, Md. Emdadul
    Mizuno, Takeshi
    Kishita, Daisuke
    Takasaki, Masaya
    Ishino, Yuji
    [J]. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2010, 132 (04): : 0410061 - 0410069
  • [4] A nonlinear compensator for zero-power control and its application to vibration isolation system
    Hoque, Md. Emdadul
    Kamiya, Tetsuro
    Mizuno, Takeshi
    [J]. DETC 2005: ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2005, VOL 4, 2005, : 223 - 228
  • [5] Vibration isolation system combining zero-power magnetic suspension with springs
    Mizuno, Takeshi
    Takasaki, Masaya
    Kishita, Daisuke
    Hirakawa, Keiichiro
    [J]. CONTROL ENGINEERING PRACTICE, 2007, 15 (02) : 187 - 196
  • [6] Development of a six-axis hybrid vibration isolation system using zero-power control
    Mizuno, T.
    Hoque, M. E.
    Takasaki, M.
    Ishino, Y.
    [J]. PROCEEDINGS OF THE 45TH IEEE CONFERENCE ON DECISION AND CONTROL, VOLS 1-14, 2006, : 6535 - +
  • [7] Development of a three-axis active vibration isolation system using zero-power magnetic suspension
    Mizuno, T
    Takasaki, M
    Suzuki, H
    Ishino, Y
    [J]. 42ND IEEE CONFERENCE ON DECISION AND CONTROL, VOLS 1-6, PROCEEDINGS, 2003, : 4493 - 4498
  • [8] A three-axis vibration isolation system using modified zero-power controller with parallel mechanism technique
    Hoque, Md. Emdadul
    Mizuno, Takeshi
    Ishino, Yuji
    Takasaki, Masaya
    [J]. MECHATRONICS, 2011, 21 (06) : 1055 - 1062
  • [9] Active system with zero-compliance and zero-power characteristics
    Shahadat M.M.Z.
    Mizuno T.
    Ishino Y.
    Takasaki M.
    [J]. International Journal of Dynamics and Control, 2018, 6 (4) : 1617 - 1628
  • [10] Development of a three-axis active vibration isolator using zero-power control
    Hoque, Emdadul
    Takasaki, Masaya
    Ishino, Yuji
    Mizuno, Takeshi
    [J]. IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2006, 11 (04) : 462 - 470
12345