Influence of secondary electro-conductive phases on sliding wear performance of zirconia based ceramic composites

被引：0
|
作者：
Bonny, K. [1 ]
De Baets, P. [1 ]
Van der Biest, O. [2 ]
Vleugels, J. [2 ]
Lauwers, B. [3 ]
机构：
[1] Univ Ghent, Dept Mech Construct & Prod, IR04, Ghent, Belgium
[2] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Heverlee, Belgium
[3] Katholieke Univ Leuven, Dept Mech Engn, B-3001 Heverlee, Belgium
来源：
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3 | 2007年 / 561-565卷
关键词：
ZrO2; composite; wire EDM; surface integrity; wear rate; reciprocating dry sliding;
D O I：
10.4028/www.scientific.net/MSF.561-565.651
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Zirconia-based ceramic composites such as ZrO2-WC, ZrO2-TiCN and ZrO2-TiN, are suitable for wire-EDM, due to their sufficiently electro-conductive secondary phases inside. Thus, the material removal technique of EDM to shape complex geometry materials economically and with high accuracy, irrespective of mechanical properties, could be successfully employed on these ceramics. Samples of these ZrO2-based ceramics were developed in laboratory and manufactured and surface finished by wire-EDM. Reciprocative dry sliding pin-on-plate experiments revealed that the ZrO2-WC composite exhibits better tribological characteristics in comparison with the composites of ZrO2-TiCN and ZrO2-TiN. Furthermore, topographies and cross-sectional views of worn surfaces were analyzed by SEM, revealing that the secondary phase inside the investigated composites governs the wear mechanism.
引用
收藏
页码：651 / +
页数：2
相关论文
共 44 条
  • [31] Effect of Si3N4 Ceramic Particulates on Mechanical, Thermal, Thermo-Mechanical and Sliding Wear Performance of AA2024 Alloy Composites
    Bhaskar, Sourabh
    Kumar, Mukesh
    Patnaik, Amar
    SILICON, 2022, 14 (01) : 239 - 262
  • [32] Cutting performance and wear mechanism of zirconia toughened alumina ceramic cutting tools formed by vat photopolymerization-based 3D printing
    Liu, Wei
    Wu, Haidong
    Xu, Yuerui
    Lin, Lifu
    Li, Yehua
    Wu, Shanghua
    CERAMICS INTERNATIONAL, 2023, 49 (14) : 23238 - 23247
  • [33] Influence of WC-12Co reinforcement on sliding wear performance of stainless steel-based MMC processed in a microwave oven
    Pal, Jatinder
    Gupta, Dheeraj
    Singh, Tejinder Paul
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (13) : 6643 - 6672
  • [34] Influence of pore structures on friction and wear properties of iron-based oil-containing composites under dry and self-lubricated sliding conditions
    Li, Rongrong
    Yin, Yanguo
    Miao, Jilin
    Fang, Xiaoliang
    Li, Congmin
    Xu, Ming
    WEAR, 2024, 556-557
  • [35] Influence of Cold Isostatic Pressure on Formation of Secondary Nanoscale Zirconia Inclusions in Alumina Grains in Ceramic Composites 3Y-TZP with Small Amount of Al2O3
    Danilenko, L. Ahkozov, I
    Volkova, G.
    Glazunova, V
    Burkhovetski, V
    Konstantinova, T.
    Lasko, G.
    Schmauder, S.
    PROCEEDINGS OF THE 2018 IEEE 8TH INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATION & PROPERTIES (NAP-2018), 2018,
  • [36] Influence of the Technology of Production of Composites Based on the Max Phases of Titanium on the Process of Wear in Contact with Copper. Part 1. Two-Stage Technology
    Prikhna, T. O.
    Podhurs'ka, V. Ya.
    Ostash, O. P.
    Vasyliv, B. D.
    Sverdun, V. B.
    Karpets', M. V.
    Serbenyuk, T. B.
    MATERIALS SCIENCE, 2019, 54 (04) : 589 - 595
  • [37] Influence of the Technology of Production of Composites Based on the MAX Phases of Titanium on the Process of Wear in Contact with Copper. Part 2. Single-Stage Technology
    Т. О. Prikhna
    V. Ya. Podhurs’ka
    О. P. Ostash
    B. D. Vasyliv
    V. B. Sverdun
    M. V. Karpets’
    T. B. Serbenyuk
    Materials Science, 2019, 55 : 1 - 8
  • [38] Influence of the Technology of Production of Composites Based on the Max Phases of Titanium on the Process of Wear in Contact with Copper. Part 1. Two-Stage Technology
    Т. О. Prikhna
    V. Ya. Podhurs’ka
    О. P. Оstash
    B. D. Vasyliv
    V. B. Sverdun
    М. V. Karpets’
    Т. B. Serbenyuk
    Materials Science, 2019, 54 : 589 - 595
  • [39] INFLUENCE OF THE TECHNOLOGY OF PRODUCTION OF COMPOSITES BASED ON THE MAX PHASES OF TITANIUM ON THE PROCESS OF WEAR IN CONTACT WITH COPPER. PART 2. SINGLE-STAGE TECHNOLOGY
    Prikhna, T. O.
    Podhurs'ka, V. Ya
    Ostash, O. P.
    Vasyliv, B. D.
    Sverdun, V. B.
    Karpets', M., V
    Serbenyuk, T. B.
    MATERIALS SCIENCE, 2019, 55 (01) : 1 - 8
  • [40] Parametric Optimization and Ranking Analysis of Hybrid AA2024–SiC/Si3N4 Alloy Composites Based on Mechanical and Sliding Wear Performance
    Kumar M.
    Kumar R.
    Bhaskar S.
    Kumar A.
    Harizan S.
    Journal of Bio- and Tribo-Corrosion, 2022, 8 (01):
12345