EXPERIMENT RESEARCH ON EXPLOSION PROCESS OF HIGH-TEMPERATURE MOLTEN ALUMINUM IN CONTACT WITH WATER

被引:0
|
作者
Li, Xue [1 ]
Yang, Chunhai [2 ]
Chen, Bing [3 ]
Zhou, Ning [1 ]
Liu, Xuanya [4 ]
Huang, Weiqiu [1 ]
Zhao, Huijun [1 ]
Rasouli, Vamegh [5 ]
机构
[1] Changzhou Univ, Sch Petr Engn, Changzhou 213164, Jiangsu, Peoples R China
[2] Changshu Inst Technol, Sch Mat Engn, Suzhou 215500, Peoples R China
[3] China Acad Safety Prod Res, Inst Ind Safety, Beijing 100012, Peoples R China
[4] Tianjin Fire Res Inst MEM, Tianjin 300381, Peoples R China
[5] Univ North Dakota, Coll Engn & Mines, Grand Forks, ND 58202 USA
关键词
high-temperature molten aluminum; steam explosion; explosion shock wave; energy transformation ratio; VAPOR EXPLOSION; STEAM EXPLOSIONS; DROP IMPACT;
D O I
10.1615/HEATTRANSRES.2022039535
中图分类号
O414.1 [热力学];
学科分类号
摘要
A test system is designed to reveal the explosive mechanism of the interaction between high-temperature molten aluminum and water. The thermal infrared imager, the high-speed camera, the pressure transducer, and other related devices are used to monitor the interaction between high-temperature molten aluminum and water, to reveal the external morphology change, temperature field change, and phase transformation process of aluminum droplets after high-temperature molten aluminum contact with water. The experiment results show that film boiling occurs instantly when the high-temperature molten aluminum contacts with water. The shock produced by vigorous vaporization of water causes disturbance and expands rapidly, accelerating the fragmentation of aluminum droplets at high temperature and increasing the contact area between aluminum droplets and water. After 40 ms, film boiling is transformed to core boiling until the explosion and splashing occurs. Thermal conductivity, thermal radiation, and convection effects produced by the interaction between high-temperature molten aluminum and water increase the temperature around the pool. Temperatures rise faster directly above the pool, followed by areas between 50 cm and 100 cm away from the pool. The temperature right above the pool reaches the maximum temperature of 866.7 degrees C at 510 ms. The high-temperature molten aluminum splashes around the pool due to the explosion, which leads to a high temperature. The high temperature occurs instantly in the area between 50 cm and 100 cm from the pool and reaches 370 degrees C. The overall temperature within 100 cm away from the pool is higher than 100 degrees C. According to the energy conservation, explosion shock theory integrated with the experimental results, there are about 3.34% to 11.23% of the potential thermal energy of high-temperature molten aluminum converted into explosive shock wave energy in the contact of high-temperature molten aluminum with water.
引用
收藏
页码:75 / 90
页数:16
相关论文
共 50 条
  • [21] Study on large-scale steam explosion of molten aluminum and water
    Shen, Zhengxiang
    Chen, Hu
    Lv, Zhongjie
    Wang, Du
    Chen, Dingyue
    Huang, Fenglei
    PROCESS SAFETY PROGRESS, 2020, 39 (04)
  • [22] Molten metal and water direct contact interaction research - I. Photographic experiment study
    Zhou, Yuan
    Lin, Meng
    Zhong, Mingjun
    Yan, Xiao
    Yang, Yanhua
    ANNALS OF NUCLEAR ENERGY, 2014, 70 : 248 - 255
  • [23] Experimental analysis of the melting process of a high-temperature molten salt in a rectangular container
    Yu, Boxu
    Chen, Wei
    Liu, Qian
    Liao, Zhirong
    Xu, Chao
    ENERGY, 2025, 318
  • [24] Advances in High-Temperature Molten Salt-Based Carbon Nanofluid Research
    Chen, Xia
    Zhang, Mingxuan
    Wu, Yuting
    Ma, Chongfang
    ENERGIES, 2023, 16 (05)
  • [25] Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer
    Tzanakis, I.
    Lebon, G. S. B.
    Eskin, D. G.
    Pericleous, K.
    9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015), 2015, 656
  • [26] CALIBRATION RESEARCH AND EXPERIMENT ON THE CORE PARAMETERS OF HIGH-TEMPERATURE STRAIN GAUGE
    Wang Wen-rui
    Zhang Jia-ming
    Nie Shuai
    JOURNAL OF INVESTIGATIVE MEDICINE, 2014, 62 (08) : S46 - S46
  • [27] Study of fluxing temperature in molten aluminum refining process
    Majidi, O.
    Shabestari, S. G.
    Aboutalebi, M. R.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 182 (1-3) : 450 - 455
  • [28] HETEROPOLY ANIONS AS CORROSION-INHIBITORS FOR ALUMINUM IN HIGH-TEMPERATURE WATER
    LOMAKINA, SV
    SHATOVA, TS
    KAZANSKY, LP
    CORROSION SCIENCE, 1994, 36 (09) : 1645 - &
  • [29] HIGH-TEMPERATURE RESEARCH
    GROSSE, AV
    SCIENCE, 1963, 140 (356) : 781 - &
  • [30] INVESTIGATION OF HIGH-TEMPERATURE MOLTEN-SALTS PREDOMINANTLY COMPOSED OF CHLORIDE FOR ALUMINUM-ELECTROREFINING
    UEDA, M
    KONDA, S
    SASAKI, T
    ISHIKAWA, T
    DENKI KAGAKU, 1995, 63 (07): : 664 - 668