Data analysis for investigating the tribological behaviors of aluminum-silicon alloys

被引：2
|
作者：
Azadi, Mahboobeh [1 ]
Azadi, Mohammad [2 ]
机构：
[1] Semnan Univ, Fac Mat & Met Engn, Semnan, Iran
[2] Semnan Univ, Fac Mech Engn, Semnan, Iran
来源：
DATA IN BRIEF | 2022年 / 42卷
关键词：
Wear dataset; Nanoparticles; Hardness; Elastic module; Nanocomposite; Aluminum alloys;
D O I：
10.1016/j.dib.2022.108260
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
This dataset describes the tribological properties of aluminum-silicon alloys when reinforced with two types of nanoparticles: silica and clay. Moreover, two types of aluminum-silicon alloys were chosen as matrices. These alloys are used in the piston and cylinder-head parts of an automobile engine part. The percentage of nanoparticles was about 1 wt. %. All specimens were developed through the stir casting method. The range of casting temperature was about 700 -850 degrees C. Stirring times for aluminum alloy melts were 2 and 4 min. Ageing heat treatment was also applied for some specimens after the casting process. The Vickers hardness instrument, a pin-on-disk tribometer, and compression test were utilized to collect the data. In addition, to analyze data, a Design-Expert software was used. The data contain hardness, wear rate, friction coefficient, and compression elastic module for aluminum-silicon alloy specimens. (C) 2022 The Author(s). Published by Elsevier Inc.
引用
收藏
页数：17
相关论文
共 50 条
  • [31] MODIFICATION OF ALUMINUM-SILICON ALLOYS BY SODIUM OR STRONTIUM - COMPARATIVE STUDY - PERMANENT MODIFICATION OF ALUMINUM-SILICON ALLOYS - EXPERIENCE FROM APPLICATION OF PROCESS
    ALKER, K
    [J]. FONDERIE, 1973, 28 (326): : 300 - 305
  • [32] ELEMENTS OF V GROUP AS MODIFIERS OF ALUMINUM-SILICON ALLOYS
    PILLAI, NR
    ANANTHAR.TR
    [J]. TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1968, 242 (09): : 2025 - &
  • [33] Fatigue and creep properties of aluminum-silicon cast alloys
    Takigawa, Jun
    [J]. Keikinzoku Yosetsu/Journal of Light Metal Welding and Construction, 2010, 48 (08): : 10 - 15
  • [34] Density and solidification shrinkage of hypoeutectic aluminum-silicon alloys
    Magnusson, T
    Arnberg, L
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (10): : 2605 - 2613
  • [35] EXCESS VACANCIES AND NUCLEATION OF PRECIPITATES IN ALUMINUM-SILICON ALLOYS
    OZAWA, E
    KIMURA, H
    [J]. ACTA METALLURGICA, 1970, 18 (09): : 995 - &
  • [36] THE DISSOLUTION OF STRONTIUM-CONTAINING MASTER ALLOYS IN ALUMINUM AND ALUMINUM-SILICON FOUNDRY ALLOYS
    PEKGULERYUZ, M
    CLOSSET, B
    GRUZLESKI, JE
    [J]. CIM BULLETIN, 1985, 78 (878): : 97 - 97
  • [37] Density and solidification shrinkage of hypoeutectic aluminum-silicon alloys
    T. Magnusson
    L. Arnberg
    [J]. Metallurgical and Materials Transactions A, 2001, 32 : 2605 - 2613
  • [38] Surface porosity investigation of aluminum-silicon PM alloys
    Steedman, G.
    Bishop, D. P.
    Caley, W. F.
    Kipouros, G. J.
    [J]. POWDER TECHNOLOGY, 2012, 226 : 225 - 230
  • [39] STRUCTURAL MODIFICATION OF ALUMINUM-SILICON ALLOYS BY ANTIMONY TREATMENT
    NAGEL, G
    PORTALIER, R
    [J]. INTERNATIONAL CAST METALS JOURNAL, 1980, 5 (04): : 2 - 6
  • [40] ALLOYING ALUMINUM-SILICON ALLOYS TO IMPROVE THEIR PROPERTIES.
    Stepanov, Yu.N.
    Konovalov, Yu.I.
    Gulyaev, B.B.
    Petrov, S.M.
    Shemetev, G.F.
    [J]. Tsvetnye Metally, 1988, 1 : 66 - 68
12345