Data analysis for investigating the tribological behaviors of aluminum-silicon alloys

被引：2
|
作者：
Azadi, Mahboobeh [1 ]
Azadi, Mohammad [2 ]
机构：
[1] Semnan Univ, Fac Mat & Met Engn, Semnan, Iran
[2] Semnan Univ, Fac Mech Engn, Semnan, Iran
来源：
DATA IN BRIEF | 2022年 / 42卷
关键词：
Wear dataset; Nanoparticles; Hardness; Elastic module; Nanocomposite; Aluminum alloys;
D O I：
10.1016/j.dib.2022.108260
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
This dataset describes the tribological properties of aluminum-silicon alloys when reinforced with two types of nanoparticles: silica and clay. Moreover, two types of aluminum-silicon alloys were chosen as matrices. These alloys are used in the piston and cylinder-head parts of an automobile engine part. The percentage of nanoparticles was about 1 wt. %. All specimens were developed through the stir casting method. The range of casting temperature was about 700 -850 degrees C. Stirring times for aluminum alloy melts were 2 and 4 min. Ageing heat treatment was also applied for some specimens after the casting process. The Vickers hardness instrument, a pin-on-disk tribometer, and compression test were utilized to collect the data. In addition, to analyze data, a Design-Expert software was used. The data contain hardness, wear rate, friction coefficient, and compression elastic module for aluminum-silicon alloy specimens. (C) 2022 The Author(s). Published by Elsevier Inc.
引用
收藏
页数：17
相关论文
共 50 条
  • [1] TRIBOLOGICAL CHARACTERISTICS OF LEADED ALUMINUM-SILICON BEARING ALLOYS
    PATHAK, JP
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1993, 46 (06): : 377 - 385
  • [2] Analysis of stresses in aluminum-silicon alloys
    Saigal, A
    Fuller, ER
    COMPUTATIONAL MATERIALS SCIENCE, 2001, 21 (01) : 149 - 158
  • [3] Production and tribological properties of aluminum-silicon alloys with lead particles
    Konopka, Z
    Braszczynski, J
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 1673 - 1676
  • [4] ALUMINUM-SILICON ALLOYS
    GRANGER, DA
    JOURNAL OF METALS, 1987, 39 (07): : A61 - A61
  • [5] HYDROGEN AND POROSITY IN ALUMINUM-SILICON AND ALUMINUM-MAGNESIUM ALLOYS .1. ALUMINUM-SILICON ALLOYS
    CHEN, XG
    ENGLER, S
    METALL, 1991, 45 (10): : 995 - 1000
  • [6] SILICON DIFFUSION IN LIQUID ALUMINUM-SILICON ALLOYS
    LOZOVSKII, VN
    POLITOVA, NF
    SKLYAROV, YI
    ZHURNAL FIZICHESKOI KHIMII, 1976, 50 (08): : 2137 - 2138
  • [7] ON FRACTURE OF SILICON PARTICLES IN ALUMINUM-SILICON ALLOYS
    GANGULEE, A
    GURLAND, J
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1967, 239 (02): : 269 - &
  • [8] Eutectic solidification of aluminum-silicon alloys
    Shankar, S
    Riddle, YW
    Makhlouf, MM
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (09): : 3038 - 3043
  • [9] PHASE ANALYSIS FOR SILICON-COMPOUNDS IN PRIMARY ALUMINUM-SILICON ALLOYS
    KOZLYUKOVA, NB
    SHAEVICH, SB
    VLASOV, NA
    KYUN, AV
    INDUSTRIAL LABORATORY, 1977, 43 (01): : 27 - 28
  • [10] Effect of Degassing on Aluminum-Silicon Alloys
    Khorasani, A. N.
    Transactions of the American Foundrymen's Society, (99):
12345