Investigation into the effect of the nut thread run-out on the stress distribution in a bolt using the finite element method

被引：13
|
作者：
Hobbs, JW [1 ]
Burguete, RL [1 ]
Patterson, EA [1 ]
机构：
[1] Univ Sheffield, Dept Mech Engn, Sheffield S1 3JD, S Yorkshire, England
来源：
JOURNAL OF MECHANICAL DESIGN | 2003年 / 125卷 / 03期
关键词：
D O I：
10.1115/1.1567312
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
By means of comparing results from finite element analysis and photoelasticity, the salient characteristics of a finite element model of a nut and bolt have been established. A number of two-dimensional and three-dimensional models were created with varying levels a complexity, and the results were compared with photoelastic results. It was found that both two-dimensional and three-dimensional models could produce accurate results provided the nut thread run-out and friction were modeled accurately. When using two-dimensional models, a number of models representing different positions around the helix of the thread were created to obtain more data for the stress distribution. This approach was found to work well and to be economical.
引用
收藏
页码：527 / 532
页数：6
相关论文
共 50 条
  • [41] Analysis of the run-out processes of the Xinlu Village landslide using the generalized interpolation material point method
    Ying, Chunye
    Zhang, Kun
    Wang, Ze-Nian
    Siddiqua, Sumi
    Makeen, Gehad Mohamed Hossam
    Wang, Luqi
    [J]. LANDSLIDES, 2021, 18 (04) : 1519 - 1529
  • [42] Analysis of the run-out processes of the Xinlu Village landslide using the generalized interpolation material point method
    Chunye Ying
    Kun Zhang
    Ze-Nian Wang
    Sumi Siddiqua
    Gehad Mohamed Hossam Makeen
    Luqi Wang
    [J]. Landslides, 2021, 18 : 1519 - 1529
  • [43] Investigation of the axial stiffness of a bolt using a three-dimensional finite element model
    Zadoks, RI
    Kokatam, DPR
    [J]. JOURNAL OF SOUND AND VIBRATION, 2001, 246 (02) : 349 - 373
  • [44] Biomechanical influence of thread form on stress distribution over short implants (≤6 mm) using finite element analysis
    Liu, Fan
    Mao, Zhi-Hong
    Peng, Wujie
    Wen, Sheng
    [J]. BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 2022, 67 (01): : 53 - 60
  • [45] Investigation of granular flow run-out behavior under dilative and compressive Coriolis conditions using DEM simulation
    Zhang, Bei
    Li, Wenyang
    Huang, Yu
    [J]. Canadian Geotechnical Journal, 2024, 61 (11) : 2434 - 2449
  • [46] Stress Investigation on the Rolling Tires across the Speed Bump Using Finite Element Method
    Hidayat, Royan
    Pranoto, Sarwo Edy
    Tauviqirrahman, Mohammad
    Bayuseno, Athanasius P.
    [J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE AND TECHNOLOGY (ICAMST 2015), 2016, 1725
  • [47] Investigation of granular flow run-out behavior under dilative and compressive Coriolis conditions using DEM simulation
    Zhang, Bei
    Li, Wenyang
    Huang, Yu
    [J]. CANADIAN GEOTECHNICAL JOURNAL, 2024,
  • [48] Simulation of Intraplate Stress Distribution of the Indian Tectonic Plate Using the Finite Element Method
    Ashish Bahuguna
    D. Shanker
    [J]. Pure and Applied Geophysics, 2022, 179 : 125 - 148
  • [49] ANALYSIS OF STRESS AND STRAIN DISTRIBUTION IN AN AGRICULTURAL VEHICLE WHEEL USING FINITE ELEMENT METHOD
    St Biris, S.
    Maicani, E.
    Ungureanu, N.
    Vladut, V.
    Murad, E.
    [J]. AKTUALNI ZADACI MEHANIZACIJE POLJOPRIVREDE, 2011, 39 : 107 - +
  • [50] Simulation of Intraplate Stress Distribution of the Indian Tectonic Plate Using the Finite Element Method
    Bahuguna, Ashish
    Shanker, D.
    [J]. PURE AND APPLIED GEOPHYSICS, 2022, 179 (01) : 125 - 148
12345