Investigation into the effect of the nut thread run-out on the stress distribution in a bolt using the finite element method

被引：13

作者：

Hobbs, JW ^{[1
]}

Burguete, RL ^{[1
]}

Patterson, EA ^{[1
]}

机构：

[1] Univ Sheffield, Dept Mech Engn, Sheffield S1 3JD, S Yorkshire, England

来源：

JOURNAL OF MECHANICAL DESIGN | 2003年 / 125卷 / 03期

关键词：

D O I：

10.1115/1.1567312

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

By means of comparing results from finite element analysis and photoelasticity, the salient characteristics of a finite element model of a nut and bolt have been established. A number of two-dimensional and three-dimensional models were created with varying levels a complexity, and the results were compared with photoelastic results. It was found that both two-dimensional and three-dimensional models could produce accurate results provided the nut thread run-out and friction were modeled accurately. When using two-dimensional models, a number of models representing different positions around the helix of the thread were created to obtain more data for the stress distribution. This approach was found to work well and to be economical.

引用

页码：527 / 532

页数：6

共 50 条

[1] Investigation into the Effect of the Nut Thread Cutting on the Stress Distribution in a Bolt Using the Finite Element Method
Duan, Zhidong
Gao, Junfeng
Su, Tieming
[J]. MANUFACTURING PROCESSES AND SYSTEMS, PTS 1-2, 2011, 148-149 : 99 - +
[2] STRESS ANALYSIS OF A BOLT-NUT JOINT BY FINITE-ELEMENT METHOD AND COPPER-ELECTROPLATING METHOD .2. STRESS AT ROOT OF A BOLT THREAD UNDER A TENSILE LOAD
MARUYAMA, K
[J]. BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1974, 17 (106): : 442 - 450
[3] APPLICATION OF THE FINITE-ELEMENT METHOD TO BOLT-NUT JOINTS - FUNDAMENTAL-STUDIES ON ANALYSIS OF BOLT-NUT JOINTS USING THE FINITE-ELEMENT METHOD
TANAKA, M
MIYAZAWA, H
ASABA, E
HONGO, K
[J]. BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1981, 24 (192): : 1064 - 1071
[4] Distribution Estimation Method of the radial run-out of the antifriction bearing
Li, Li-hong
Li, Ji-shun
Xue, Yu-jun
Yu, Tong-shuai
Yu, Yong-jian
[J]. 2017 INTERNATIONAL CONFERENCE ON ADVANCED MECHATRONIC SYSTEMS (ICAMECHS), 2017, : 290 - 296
[5] 3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out
Davoudinejad, Ali
Tosello, Guido
Parenti, Paolo
Annoni, Massimiliano
[J]. MICROMACHINES, 2017, 8 (06)
[6] THE INVESTIGATION OF STRESS DISTRIBUTION ON THE TRACTOR CLUTCH FINGER MECHANISM BY USING FINITE ELEMENT METHOD
Karpat, F.
Dogan, O.
Yuce, C.
Kaya, N.
Cengiz, G.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 9, 2015,
[7] Investigation of stress distribution in implant thread design: A 3D Finite Element Analysis
Jackson Irudhayam, S.
Hariram, V.
[J]. Materials Today: Proceedings, 2021,
[8] ANALYSIS OF BOLT JOINT USING THE FINITE ELEMENT METHOD
Zylinski, Bartlomiej
Buczkowski, Ryszard
[J]. ARCHIVE OF MECHANICAL ENGINEERING, 2010, 57 (03) : 275 - 292
[9] APPLICATION OF THE FINITE-ELEMENT METHOD TO BOLT-NUT JOINTS .2. APPLICATION CONSIDERING THE GEOMETRY OF BOLT-NUT JOINTS
TANAKA, M
HONGO, K
ASABA, E
[J]. BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (216): : 1114 - 1114
[10] Cooling pattern on the run-out table of a hot rolling mill for an HSLA steel: a finite element analysis
Saba Yazdani
Mohammad Reza Tavakoli
Mohammad Reza Niroomand
Mohammad Reza Forouzan
[J]. The International Journal of Advanced Manufacturing Technology, 2024, 132 : 2381 - 2393

← 1 2 3 4 5 →