Study on the mechanical properties, environmental effect, degradation characteristics and ionizing radiation effect on silk reinforced polypropylene/natural rubber composites

被引:45
|
作者
Shubhra, Quazi T. H. [1 ]
Alam, A. K. M. M. [2 ]
Khan, Mubarak A. [2 ]
Saha, M. [1 ]
Saha, Dipti [1 ]
Gafur, M. A. [3 ]
机构
[1] Univ Dhaka, Dept Appl Chem & Chem Technol, Dhaka 1000, Bangladesh
[2] Bangladesh Atom Energy Commiss, Inst Nucl Sci & Technol, Nucl & Radiat Chem Div, Dhaka 1000, Bangladesh
[3] BCSIR, Dhaka Labs, Fiber & Polymer Div, Dhaka, Bangladesh
关键词
Mechanical properties; Hardness; NATURAL-RUBBER; PRETREATMENT;
D O I
10.1016/j.compositesa.2010.07.007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Natural silk fiber (20%) reinforced polypropylene (PP) composites were prepared by compression molding. Tensile strength, tensile modulus, bending strength, bending modulus, impact strength and hardness of the prepared composite were found 54.7 MPa, 1826.2 MPa, 58.3 MPa, 3750.7 MPa, 17.6 kJ/m(2) and 95 shore A, respectively. To improve the biodegradable character of the composite, natural rubber (NR) was blended (10%, 25%, 50% by weight) with PP. It was found that the mechanical properties of the composite decrease with increasing NR in PP (except IS which increased rather decreasing). Environmental effect on the composite and degradation in various media were investigated in this study. Gamma radiation was used to increase the mechanical properties of the prepared composites. Increase in TS and BS were maximum at 250 krad dose for silk fiber/PP, silk fiber/PP:NR (90:10), silk fiber/PP:NR (75:25) and silk fiber/PP:NR (50:50) composites. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1587 / 1596
页数:10
相关论文
共 50 条
  • [21] Mechanical Properties of Polypropylene Composites with Different Reinforced Natural Fibers - A Comparative Study
    Simamora, Pintor
    Simanjuntak, Josua
    Sinulingga, Karya
    Laksono, Andromeda Dwi
    JOURNAL OF ECOLOGICAL ENGINEERING, 2023, 24 (07): : 311 - 317
  • [22] Effect of Rubber Powder on Mechanical Properties and Microstructure of Polypropylene Fiber Reinforced Concrete
    Mo J.
    Zeng L.
    Guo F.
    Liu Y.
    Xiang S.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2020, 23 (05): : 1222 - 1229
  • [23] Interlaminar fracture properties of fibre reinforced natural rubber/polypropylene composites
    Zulkifli, R
    Fatt, LK
    Azhari, CH
    Sahari, J
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 128 (1-3) : 33 - 37
  • [24] Effect of alkali treatment on vibration characteristics and mechanical properties of natural fabric reinforced composites
    Yan, Libo
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2012, 31 (13) : 887 - 896
  • [25] Study of Effect of Surface Treatment on Mechanical Properties of Natural Fiber Reinforced Composites
    Singh, Jai Inder Preet
    Dhawan, Vikas
    Singh, Sehijpal
    Jangid, Kapil
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 2793 - 2799
  • [26] The Effect of Filler Loading and Maleated Polypropylene on Properties of Rubberwood Filled Polypropylene/Natural Rubber Composites
    Salmah, H.
    Ismail, H.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2008, 27 (16-17) : 1867 - 1876
  • [27] The effect of dispersed paint particles on the mechanical properties of rubber toughened polypropylene composites
    Quazi, RT
    Bhattacharya, SN
    Kosior, E
    JOURNAL OF MATERIALS SCIENCE, 1999, 34 (03) : 607 - 614
  • [28] The effect of dispersed paint particles on the mechanical properties of rubber toughened polypropylene composites
    R. T. Quazi
    S. N. Bhattacharya
    E. Kosior
    Journal of Materials Science, 1999, 34 : 607 - 614
  • [29] Effect of chemical reagents on the mechanical properties of natural fiber polypropylene composites
    Tajvidi, Mehdi
    Shekaraby, Mohammad Mehdi
    Motiee, Nazanin
    Najafi, Saeed Kazemi
    POLYMER COMPOSITES, 2006, 27 (05) : 563 - 569
  • [30] The effect of interfacial interactions on the mechanical properties of polypropylene/natural zeolite composites
    Metin, D
    Tihminhoglu, F
    Balköse, D
    Ulkü, S
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2004, 35 (01) : 23 - 32