FATIGUE LIFE AND FRACTURE OF CAST GAMMA TIAL INTERMETALLIC ALLOY AT ROOM AND ELEVATED TEMPERATURES

被引:0
|
作者
Petrenec, Martin [1 ]
Smid, Miroslav [1 ]
Polak, Jaroslav [1 ]
机构
[1] Acad Sci Czech Republic, Inst Phys Mat, CEITEC IPM, Brno 61662, Czech Republic
关键词
low cycle fatigue; cast gamma TiAl alloy; fracture surfaces; PSMs; elevated temperature; LOW-CYCLE FATIGUE;
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The low-cycle fatigue properties, surface relief and fracture surfaces of cast TiAl alloys with 2 at.% Nb having nearly lamellar microstructure were studied at room temperature and at 750 degrees C. Cyclic stress-strain curves (CSSC) and fatigue life curves were obtained at both temperatures. The surface relief and the fracture surfaces of fractured specimens were observed using scanning electron microscopy. At room temperature, significant cyclic hardening is observed whereas at 750 degrees C cyclic response was stable. Parameters of the CSSC, the Manson-Coffin law and the Basquin law were determined. Persistent slip markings formed along interlamellar interfaces were predominant locations for fatigue cracks at both temperatures. The cracks initiated at surface or in sub-surface region led to the formation of smooth flat areas on the fracture surface corresponding to the persistent slip bands.
引用
收藏
页码:969 / 974
页数:6
相关论文
共 50 条
  • [41] Mechanical properties of intermetallic y-TiAl based alloys at elevated temperatures
    Weller, M
    Chatterjee, A
    Haneczok, G
    Clemens, H
    DIFFUSIONS IN MATERIALS: DIMAT2000, PTS 1 & 2, 2001, 194-1 : 589 - 594
  • [42] Fatigue crack propagation at elevated temperatures in titanium aluminide intermetallic
    Tokaji, K
    Shiota, H
    Nemura, CA
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 268 (1-2): : 63 - 69
  • [43] Fatigue crack propagation at elevated temperatures in titanium aluminide intermetallic
    Tokaji, K
    Shiota, H
    Nemura, M
    PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 3: ADVANCE MATERIALS AND MODELLING OF MECHANICAL BEHAVIOUR, 1999, : 874 - 879
  • [44] Deformation and fracture behavior of cast and extruded 7075Al-SiCp composites at room and elevated temperatures
    Kulkarni, MD
    Robi, PS
    Prasad, RC
    Ramakrishnan, P
    MATERIALS TRANSACTIONS JIM, 1996, 37 (03): : 223 - 229
  • [45] METAL AND ALLOY FATIGUE AT ELEVATED-TEMPERATURES
    ILSCHNER, B
    MATERIALS SCIENCE AND ENGINEERING, 1987, 88 : 350 - 350
  • [46] Deformation and fracture behavior of cast and extruded 7075Al-SiCp composites at room and elevated temperatures
    Kulkarni, M.D.
    Robi, P.S.
    Prasad, R.C.
    Ramakrishnan, P.
    1996, Japan Inst of Metals, Sendai, Japan (37):
  • [47] Deformation and Fracture of a Magnesium Alloy at Elevated Temperatures
    Lukac, Pavel
    Donic, Tibor
    Chalupova, Maria
    Palcek, Peter
    Trojanova, Zuzanka
    Tillova, Eva
    Rusz, Stanislav
    Bastovansky, Ronald
    MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII, 2014, 592-593 : 75 - +
  • [49] Dry tribological behavior of a cast Mg-Gd-Zr-Ag alloy at room and elevated temperatures
    Mansouri, A.
    Ghasemi, H. M.
    Yazdi, R.
    Mahmudi, R.
    Sohi, M. Heydarzadeh
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 18 : 5126 - 5143
  • [50] The role of competing mechanisms in the fatigue-life variability of a titanium and gamma-TiAl alloy
    Jha, SK
    Larsen, JM
    Rosenberger, AH
    JOM, 2005, 57 (09) : 50 - 54