Selective appearance of ε-martensitic transformation and dynamic strain aging in Fe-Mn-C austenitic steels

被引：28
|
作者：
Koyama, Motomichi [1 ,2 ]
Sawaguchi, Takahiro [2 ]
Tsuzaki, Kaneaki [1 ,2 ]
机构：
[1] Univ Tsukuba, Doctoral Program Mat Sci & Engn, Tsukuba, Ibaraki 3050047, Japan
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
来源：
PHILOSOPHICAL MAGAZINE | 2012年 / 92卷 / 24期
基金：
日本学术振兴会;
关键词：
martensitic transformation; Fe-based alloy; planar defect; stress-strain measurement; tensile testing; dynamic strain aging; austenitic steel; solution hardening; STACKING-FAULT ENERGY; FCC->HCP TRANSFORMATION; DISLOCATION DENSITIES; PLASTIC-DEFORMATION; SINGLE-CRYSTALS; STAINLESS-STEEL; TEMPERATURE; MECHANISM; ALLOYS; NUCLEATION;
D O I：
10.1080/14786435.2012.685769
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of stress-induced epsilon-martensitic transformation on the serrated flow behavior associated with dynamic strain aging was investigated. The epsilon-martensitic transformation was controlled by changing the deformation temperature and adding Si to Fe-17Mn-xSi-0.3C alloys. The addition of Si promoted the epsilon-martensitic transformation, and suppressed the slip deformation due to solution hardening. The initiation of serrations around room temperature was delayed by the promotion of epsilon-martensitic transformation which initiated plastic deformation. The critical stress for the occurrence of serrations and the critical stress for the occurrence of slip deformation were found to have a linear relationship.
引用
收藏
页码：3051 / 3063
页数：13
相关论文
共 50 条
  • [21] THERMODYNAMIC PREDICTION OF MS AND DRIVING FORCE FOR MARTENSITIC-TRANSFORMATION IN FE-MN-C ALLOYS
    CHANG, HB
    ZUYAO, TYHX
    ACTA METALLURGICA, 1986, 34 (02): : 333 - 338
  • [22] ON THE AGING OF FE-NI-C AND FE-MN-C MARTENSITES
    KAJATKARI, M
    ULLAKKO, K
    PIETIKAINEN, J
    JOURNAL DE PHYSIQUE, 1982, 43 (NC-4): : 461 - 466
  • [23] Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/ε-martensite dual-phase Fe-Mn-C steels
    Seol, Jae-Bok
    Jung, J. E.
    Jang, Y. W.
    Park, C. G.
    ACTA MATERIALIA, 2013, 61 (02) : 558 - 578
  • [24] Premature Fracture Mechanism in an Fe-Mn-C Austenitic Steel
    Motomichi Koyama
    Takahiro Sawaguchi
    Kaneaki Tsuzaki
    Metallurgical and Materials Transactions A, 2012, 43 : 4063 - 4074
  • [25] Role of copper and aluminum additions on the hydrogen embrittlement susceptibility of austenitic Fe-Mn-C TWIP steels
    Dieudonne, T.
    Marchetti, L.
    Wery, M.
    Chene, J.
    Allely, C.
    Cugy, P.
    Scott, C. P.
    CORROSION SCIENCE, 2014, 82 : 218 - 226
  • [26] Evolution of microstructure and strength during the ultra-fast tempering of Fe-Mn-C martensitic steels
    Massardier, V.
    Goune, M.
    Fabregue, D.
    Selouane, A.
    Douillard, T.
    Bouaziz, O.
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (22) : 7782 - 7796
  • [27] Pearlite growth rate in Fe-C and Fe-Mn-C steels
    Seo, S. -W.
    Bhadeshia, H. K. D. H.
    Suh, D. -W.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (04) : 487 - 493
  • [28] THE STUDY OF DEFORMATION TWINS IN THE AUSTENITIC FE-MN-C AND FE-MN-AL-C ALLOYS
    LAI, HJ
    WAN, CM
    SCRIPTA METALLURGICA, 1989, 23 (02): : 179 - 182
  • [29] Study of deformation twins in the austenitic Fe-Mn-C and Fe-Mn-Al-C alloys
    Lai, H.J., 1600, (23):
  • [30] Strain-induced martensitic transformation in textured austenitic stainless steels
    Mertinger, V.
    Nagy, E.
    Tranta, F.
    Solyom, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 481 : 718 - 722
12345