Al-Fe-Ce alloys based on water-atomized powders for high-temperature applications

被引：4
|
作者：
Neikov, O. D. [1 ]
Mil'man, Yu. V. [1 ]
Sirko, A. I. [1 ]
Samelyuk, A. V. [1 ]
Krainikov, A. V. [1 ]
Efimov, N. A. [1 ]
机构：
[1] Natl Acad Sci Ukraine, Inst Problems Mat Sci, Kiev, Ukraine
来源：
POWDER METALLURGY AND METAL CERAMICS | 2007年 / 46卷 / 9-10期
关键词：
aluminum alloys; water-atomized powders; rapid crystallization; mechanical properties;
D O I：
10.1007/s11106-007-0067-8
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The microstructure and mechanical properties of Al-Fe-Ce alloys based on water-atomized powders between 20 and 300 degrees C are examined in comparison with the properties of similar alloys produced 41, other rapid crystallization techniques. Changes in atomization parameters vary both the cooling rate (from 10(4) to 10(6) K/sec) and powder size distribution (front 5 to 100 mu m). The excellent compactability Of water-atomized powders facilitates powder consolidation, which is based on hot extrusion and cold pressing of degassed powders. The mechanical properties are examined by tensile tests. The ultimate tensile strength is 500 to 550 MPa at 20 degrees C and 270 to 300 MPa at 300 degrees C at adequate plasticity. The properties achieved are comparable with those of similar alloys known from the literature.
引用
收藏
页码：429 / 435
页数：7
相关论文
共 50 条
  • [1] Al-Fe-Ce alloys based on water-atomized powders for high-temperature applications
    O. D. Neikov
    Yu. V. Mil’man
    A. I. Sirko
    A. V. Samelyuk
    A. V. Krainikov
    N. A. Efimov
    Powder Metallurgy and Metal Ceramics, 2007, 46 : 429 - 435
  • [2] Recrystallization texture of Al-Fe-Ce alloys
    Seki, F
    Yang, JP
    Ueno, N
    Ito, K
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 499 - 504
  • [3] MICROSTRUCTURE OF MELT SPUN AL-FE-CE ALLOYS
    JHA, SC
    SANDERS, TH
    JOURNAL OF METALS, 1985, 37 (08): : A53 - A53
  • [4] MICROSTRUCTURAL EVOLUTION OF RAPIDLY SOLIDIFIED AL-FE-CE POWDERS
    SALAS, O
    LEVI, CG
    JOURNAL OF METALS, 1988, 40 (07): : A45 - A45
  • [5] CHARACTERISTICS AND APPLICATIONS OF HIGH-PRESSURE WATER-ATOMIZED FINE-METAL POWDERS.
    Homma, Katsuhiko
    Fujiwara, Akifumi
    Maehara, Katsuhiko
    Okamoto, Shinya
    R and D: Research and Development Kobe Steel Engineering Reports, 1987, 37 (03): : 15 - 17
  • [6] Solidification Processing of Al-Ce Alloys for High-Temperature Applications
    El-Hadad, Shimaa
    Moussa, Mohamed Eissa
    Riedel, Eric
    Ahmed, Mostafa
    Baehr, Ruediger
    Nofal, Adel
    15TH INTERNATIONAL ALUMINIUM CONFERENCE, INALCO 2023, 2023,
  • [7] MICROSTRUCTURE STRENGTH FATIGUE CRACK-GROWTH RELATIONS IN HIGH-TEMPERATURE P/M ALUMINUM-ALLOYS, AL-FE-CE AND AL-FE-MM
    YOUNG, R
    KIRCHOFF, S
    GRIFFITH, W
    KIM, YW
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1982, 18 (03): : 267 - &
  • [8] CHARACTERIZATION OF RAPIDLY SOLIDIFIED AND MECHANICALLY ALLOYED AL-FE-CE POWDERS
    OVECOGLU, ML
    NIX, WD
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1986, 22 (01): : 17 - &
  • [9] STREAMLINE EXTRUSION OF AL-FE-CE P/M ALLOYS
    OTTO, WL
    PANCHANDEESWARAN, S
    JOURNAL OF METALS, 1985, 37 (08): : A53 - A53
  • [10] SOLUTE REDISTRIBUTION AND INTERFACIAL STABILITY IN ULTRAFINE AL-FE-CE POWDERS
    SALAS, O
    LEVI, CG
    INTERNATIONAL JOURNAL OF RAPID SOLIDIFICATION, 1988, 4 (1-2): : 1 - 21
12345