Highly Selective Copper and Nickel Separation and Recovery from Electroplating Sludge in Light Industry

被引:16
|
作者
Xu, Wei [1 ]
Liu, Wei [1 ]
Zhu, Haochen [1 ]
Xu, Jingcheng [1 ]
Li, Guangming [1 ]
Fu, Dan [2 ]
Luo, Lan [1 ]
机构
[1] Tongji Univ, Coll Environm Sci & Engn, State Key Lab Pollut Control & Resources Reuse, Shanghai 200092, Peoples R China
[2] Shanghai Engn Res Ctr Heavy Met Pollut Control &, Shanghai Light Ind Res Inst, Shanghai, Peoples R China
来源
关键词
ammonia/ammonium leaching; copper; nickel; electroplating sludge; resource reuse; HEAVY-METALS EXTRACTION; LEACHING BEHAVIOR; SEWAGE-SLUDGE; WASTE; ACID;
D O I
10.15244/pjoes/28353
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Electroplating sludge and associated waste products comprise complex mixtures of metallic elements and may cause serious environmental pollution if discharged without treatment. An effective light industrial process is modified to selectively extract and recover copper and nickel from electroplating sludge. The procedure was developed on a laboratory scale and validated in a small pilot plant. Extraction yields of greater than 95% for Cu and Ni are achieved under optimum leaching conditions. To selectively recover copper and nickel from the leaching solution, they were extracted by N902 in kerosene, followed by selective stripping using sulfuric acid. The overall recoveries of copper and nickel were 93.6% and 88.9%, respectively, via a fast, simple, and inexpensive process. Partial recovery of ammonia in the process enables some cost savings. The technology can be used for metal resource recovery from solid wastes containing copper and nickel.
引用
收藏
页码:367 / 374
页数:8
相关论文
共 50 条
  • [41] Integrated diffusion dialysis precipitation - Cementation for selective recovery of leaching chemicals and metal values from electroplating sludge
    Amrane, Chahrazad
    Bouhidel, Kamel-Eddine
    HYDROMETALLURGY, 2018, 177 : 34 - 40
  • [42] SELECTIVE RECOVERY OF COPPER FROM COPPER-NICKEL SULFIDE CONCENTRATES BY APPLYING SEGREGATION TECHNOLOGY
    OPIE, WR
    COFFIN, LD
    ARMANT, DL
    CIMLER, OF
    METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1979, 10 (01): : 27 - 32
  • [43] Recovery of copper (II) and chromium (III,VI) from electroplating-industry wastewater by ion exchange
    Yalçin, S
    Apak, R
    Hizal, J
    Afsar, H
    SEPARATION SCIENCE AND TECHNOLOGY, 2001, 36 (10) : 2181 - 2196
  • [44] Selective separation of cadmium(II), copper(II) and nickel(II) ions from electroplating wastewater using dual flat sheet supported liquid membrane
    Lee, Lai Yee
    Morad, Norhashimah
    Ismail, Norli
    Rafatullah, Mohd
    DESALINATION AND WATER TREATMENT, 2021, 224 : 291 - 301
  • [45] Selective separation and recovery of selenium and mercury from hazardous acid sludge obtained from the acid-making process of copper smelting plants
    Chen, Feixiong
    Liu, Fupeng
    Zhou, Songlin
    Wang, Jinliang
    Zeng, Yanliang
    Liao, Chunfa
    HYDROMETALLURGY, 2023, 221
  • [46] The effectiveness of nickel recovery from spent electroplating baths by electrodialysis
    Babilas, Dorota
    Dydo, Piotr
    Jakobik-Kolon, Agata
    Milewski, Andrzej
    Bentkowska, Danuta
    Franczak, Aneta
    Nycz, Ryszard
    DESALINATION AND WATER TREATMENT, 2017, 64 : 233 - 236
  • [47] Copper and nickel selective recovery by electrowinning from electronic and galvanic industrial solutions
    Fornari, P
    Abbruzzese, C
    HYDROMETALLURGY, 1999, 52 (03) : 209 - 222
  • [48] Copper and nickel selective recovery by electrowinning from electronic and galvanic industrial solutions
    Institute of Mineral Processing, Cons. Naz. Delle Ric., Via B., Rome, Italy
    Hydrometallurgy, 3 (209-222):
  • [49] Study on the electrodialytic nickel concentration from electroplating industry waste
    Dydo, Piotr
    Babilas, Dorota
    Jakobik-Kolon, Agata
    Franczak, Aneta
    Nycz, Ryszard
    SEPARATION SCIENCE AND TECHNOLOGY, 2018, 53 (08) : 1241 - 1248
  • [50] Evaluation of ion exchange resins for recovery of metals from electroplating sludge
    Adriana A. A. Evaristo
    Kelley C. R. Santos
    Luciana C. Costa
    Mônica R. C. Marques
    Polymer Bulletin, 2013, 70 : 2239 - 2255