Ceramic membranes for ozonation in wastewater treatment

Ozone, due to its high oxidative capacity, is often used in water treatment for the degradation of organic pollutants. Unfortunately, the application of ozone in the form of gas bubbles causes foam problems. To avoid the development and accumulation of foam, the transfer of ozone into the water through gas permeable membranes was investigated. Ceramic membranes were used because of the chemical inertness of the material. The hydrophilic behaviour of ceramic membranes made of metal oxides causes the water to penetrate into the pores. This creates a diffusion resistance for the ozone which decreases the transfer rates. To keep the water out of the porous structure and maintain the gas/water interface at the membrane surface, the surface properties of the membrane were changed. The membrane was soaked in a solution of a fluorinated compound. Water drop measurements and transfer rates were investigated and confirmed the stability of the hydrophobic nature of the membrane surface. The ozone transfer rates thus achieved were in the range of 12 grams of ozone per square meter per hour.