Damage Development in Hybrid Composite Laminates under Three-point Bending at Cryogenic Temperatures

被引:0
|
作者
Miura, Masaya [1 ]
Shindo, Yasuhide [1 ]
Takeda, Tomo [1 ]
Narita, Fumio [1 ]
机构
[1] Tohoku Univ, Grad Sch Engn, Dept Mat Proc, Sendai, Miyagi 9808579, Japan
来源
关键词
Cryomechanics; Finite element analysis; Material testing; Polymer-matrix composites; Damage; Interlaminar shear strength; Superconducting magnets;
D O I
10.4028/www.scientific.net/KEM.452-453.565
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper studies the damage behavior and interlaminar shear properties of hybrid composite laminates subjected to bending at cryogenic temperatures. Cryogenic short beam shear tests were performed on hybrid laminates combining woven glass fiber reinforced polymer (GFRP) composites with polyimide films, and microscopic observations of the specimens were made after the tests. A progressive damage analysis was also conducted to simulate the initiation and growth of damage in the specimens and to determine the interlaminar shear strength based on the maximum shear stress in the failure region. The predicted load-deflection curve and damage pattern show good agreement with the test results, and the numerically determined interlaminar shear strength is higher than the apparent interlaminar shear strength.
引用
收藏
页码:565 / 568
页数:4
相关论文
共 50 条
  • [31] Cryogenic static fatigue of cracked piezoelectric ceramics in three-point bending under electric fields
    Yasuhide Shindo
    Fumio Narita
    Yuhei Goto
    Acta Mechanica, 2017, 228 : 1407 - 1413
  • [32] Cryogenic static fatigue of cracked piezoelectric ceramics in three-point bending under electric fields
    Shindo, Yasuhide
    Narita, Fumio
    Goto, Yuhei
    ACTA MECHANICA, 2017, 228 (04) : 1407 - 1413
  • [33] Research on characteristic parameters of sandstone three-point bending failure under different temperatures
    Zuo, Jianping
    Zhou, Hongwei
    Liu, Yujie
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2010, 29 (04): : 705 - 712
  • [34] A multi-area fatigue damage model of composite honeycomb sandwich panels under three-point bending load
    Ma, Mingze
    Yao, Weixing
    Jiang, Wen
    Jin, Wei
    Chen, Yan
    Li, Piao
    COMPOSITE STRUCTURES, 2021, 261
  • [35] Different response under tension and compression of unidirectional carbon fibre laminates in a three-point bending test
    Serna Moreno, M. C.
    Romero Gutierrez, A.
    Martinez Vicente, J. L.
    COMPOSITE STRUCTURES, 2016, 136 : 706 - 711
  • [36] Experimental and analytical studies on the damage initiation in composite laminates at cryogenic temperatures
    Kim, Ran Y.
    Donaldson, Steve L.
    COMPOSITE STRUCTURES, 2006, 76 (1-2) : 62 - 66
  • [37] Test and Analysis of Triaxially Braided Composite Circular Arch under Three-Point Bending
    Nega, Biruk F.
    Woo, Kyeongsik
    Lee, Hansol
    COMPOSITES RESEARCH, 2019, 32 (05): : 249 - 257
  • [38] Behavior of CFRC/Al Foam Composite Sandwich Beams under Three-Point Bending
    Vcelka, Martin
    Dunn, Michelle
    Durandet, Yvonne
    Berndt, Christopher C.
    Ruan, Dong
    ADVANCED ENGINEERING MATERIALS, 2014, 16 (01) : 9 - 14
  • [39] About the Causes of the Bearing Capacity Loss of a Composite Beam under Three-Point Bending
    Paimushin, V. N.
    Kayumov, R. A.
    Shakirzyanov, F. R.
    Kholmogorov, S. A.
    UCHENYE ZAPISKI KAZANSKOGO UNIVERSITETA-SERIYA FIZIKO-MATEMATICHESKIE NAUKI, 2022, 164 (2-3): : 221 - 243
  • [40] Instability of a cylindrical shell under three-point bending
    Huang, D
    Redekop, D
    Xu, B
    THIN-WALLED STRUCTURES, 1996, 26 (02) : 105 - 122