Damage Development in Hybrid Composite Laminates under Three-point Bending at Cryogenic Temperatures

被引:0
|
作者
Miura, Masaya [1 ]
Shindo, Yasuhide [1 ]
Takeda, Tomo [1 ]
Narita, Fumio [1 ]
机构
[1] Tohoku Univ, Grad Sch Engn, Dept Mat Proc, Sendai, Miyagi 9808579, Japan
来源
关键词
Cryomechanics; Finite element analysis; Material testing; Polymer-matrix composites; Damage; Interlaminar shear strength; Superconducting magnets;
D O I
10.4028/www.scientific.net/KEM.452-453.565
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper studies the damage behavior and interlaminar shear properties of hybrid composite laminates subjected to bending at cryogenic temperatures. Cryogenic short beam shear tests were performed on hybrid laminates combining woven glass fiber reinforced polymer (GFRP) composites with polyimide films, and microscopic observations of the specimens were made after the tests. A progressive damage analysis was also conducted to simulate the initiation and growth of damage in the specimens and to determine the interlaminar shear strength based on the maximum shear stress in the failure region. The predicted load-deflection curve and damage pattern show good agreement with the test results, and the numerically determined interlaminar shear strength is higher than the apparent interlaminar shear strength.
引用
收藏
页码:565 / 568
页数:4
相关论文
共 50 条
  • [1] Characterization and modeling of fracture and damage behavior of notched woven fabric GFRP laminates under three-point bending at cryogenic temperatures
    Sanada, Kazuaki
    Shindo, Yasuhide
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (14) : 1429 - 1440
  • [2] The effect of delamination on damage behavior of composite laminates subjected to three-point bending
    Tang, J.
    Xing, S. L.
    Xiao, J. Y.
    Wu, Z. H.
    Wen, S. W.
    Ju, S.
    ADVANCES IN ENGINEERING MATERIALS AND APPLIED MECHANICS, 2016, : 599 - 607
  • [3] Simulation of Three-Point Bending of Carbon/Epoxy Composite Laminates
    Lin, Xiaohu
    Yang, Qingsheng
    Li, Jinhua
    PROCEEDINGS OF THE 2024 3RD INTERNATIONAL SYMPOSIUM ON INTELLIGENT UNMANNED SYSTEMS AND ARTIFICIAL INTELLIGENCE, SIUSAI 2024, 2024, : 367 - 371
  • [4] On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates
    De Baere, I.
    Van Paepegem, W.
    Degrieck, J.
    POLYMER COMPOSITES, 2008, 29 (10) : 1067 - 1076
  • [5] Damage propagation analysis method for matrix hybrid laminates subjected to three-point bending load
    Onita, Takafumi
    Nishiwaki, Tsuyoshi
    Maekawa, Zen-Ichiro
    Zairyo/Journal of the Society of Materials Science, Japan, 2002, 51 (01) : 112 - 117
  • [6] Notched three-point bend testing of GFRP woven laminates at cryogenic temperatures and analysis of fracture and damage properties
    Sanada, K.
    Shindo, Y.
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 52A & 52B, 2006, 824 : 264 - +
  • [7] A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates Under Three-Point Bending Using Acoustic Emission
    Liu P.F.
    Yang J.
    Wang B.
    Zhou Z.F.
    Zheng J.Y.
    Journal of Failure Analysis and Prevention, 2014, 15 (01) : 101 - 121
  • [8] Dynamic fatigue of cracked piezoelectric ceramics in three-point bending under electric fields at cryogenic temperatures
    Shindo, Yasuhide
    Narita, Fumio
    Goto, Yuhei
    ENGINEERING FRACTURE MECHANICS, 2017, 178 : 258 - 264
  • [9] Effect of damage on the interlaminar shear properties of hybrid composite laminates at cryogenic temperatures
    Miura, Masaya
    Shindo, Yasuhide
    Takeda, Tomo
    Narita, Fumio
    COMPOSITE STRUCTURES, 2010, 93 (01) : 124 - 131
  • [10] Experimental and Numerical Analysis of Progressive Damage of SiCf/SiC Composite under Three-Point Bending
    Li, Xiang
    Luo, Ruiying
    CRYSTALS, 2022, 12 (05)