Investigations on pullout behavior of geogrid-granular trench using CANAsand constitutive model

被引:7
|
作者
Noorzad, Ali [1 ]
Badakhshan, Ehsan [1 ]
机构
[1] Shahid Beheshti Univ, Fac Civil Water & Environm Engn, Tehran, Iran
关键词
Anchor; Pullout test; Geogrid; Granular trench; CANAsand constitutive model; SOIL REINFORCEMENT; UPLIFT BEHAVIOR; LOAD ECCENTRICITY; PLATE ANCHORS; CAPACITY; BED;
D O I
10.1016/j.jrmge.2017.03.013
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
Experimental and numerical investigations have been carried out on behavior of pullout resistance of embedded circular plate with and without geogrid reinforcement layers in stabilized loose and dense sands using a granular trench. Different parameters have been considered, such as the number of geogrid layers, embedment depth ratio, relative density of soil and height ratio of granular trench. Results showed that, without granular trench, the single layer of geogrid was more effective in enhancing the pullout capacity compared to the multilayer of geogrid reinforcement. Also, increasing the soil density and embedment depth ratio led to an increase in the uplift capacity. When soil was improved with the granular trench, the uplift force significantly increased. The granular trench improved the uplift load in dense sand more, as compared to the same symmetrical plate embedded in loose sand. Although it was observed that, in geogrid-reinforced granular trench condition, the ultimate pullout resistance at failure increased as the number of geogrid layers increased up to the third layer, and the fifth layer had a negligible effect in comparison with the third layer of reinforcement. Finite element analyses with hardening soil model for sand and CANAsand constitutive model for granular trench were conducted to investigate the failure mechanism and the associated rupture surfaces utilized. The response of granular material in the proposed model is an elastoplastic constitutive model derived from the CANAsand model, which uses a non-associated flow rule along with the concept of the state boundary surface possessing a critical and a compact state. It was observed that the granular trench might change the failure mechanism from deep plate to shallow plate as the failure surface can extend to the ground surface. The ultimate uplift capacity of anchor and the variation of surface deformation indicated a close agreement between the experiment and numerical model. (C) 2017 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V.
引用
收藏
页码:726 / 740
页数:15
相关论文
共 50 条
  • [31] Stress–Strain Behavior in Heavy Oil Reservoirs Using Mohr–Coulomb Constitutive Model
    C. B. Morales-Monsalve
    G. A. Alzate-Espinosa
    A. Arbelaez-Londoño
    Geotechnical and Geological Engineering, 2019, 37 : 3343 - 3353
  • [33] SPH simulation of earthquake-induced liquefaction and large deformation behaviour of granular materials using SANISAND constitutive model
    Hoang, Trieu N.
    Nguyen, Thang T.
    Nguyen, Tien, V
    Nguyen, Giang D.
    Bui, Ha H.
    COMPUTERS AND GEOTECHNICS, 2024, 174
  • [34] Investigating stress distribution of crimped SMA fibers during pullout behavior using experimental testing and a finite element model
    Ho, Ha Vinh
    Choi, Eunsoo
    Park, Sang Ju
    COMPOSITE STRUCTURES, 2021, 272
  • [35] Flow Behavior and Constitutive Model Using Piecewise Function of Strain for TC11 Alloy
    Cui Junhui
    Yang He
    Sun Zhichao
    Li Hongwei
    Li Zhijun
    Shen Changwu
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 (03) : 397 - 401
  • [36] DEFORMATIONAL BEHAVIOR AND CONSTITUTIVE EQUATION OF CONCRETE USING THE ELASTO-PLASTIC AND FRACTURE MODEL.
    Maekawa, Kohichi
    Okamura, Hajime
    Journal of the Faculty of Engineering, University of Tokyo, Series B, 1983, 37 (02): : 253 - 328
  • [37] Prediction of multiaxial mechanical behavior for conventional and highly crosslinked UHMWPE using a hybrid constitutive model
    Bergström, JS
    Rimnac, CM
    Kurtz, SM
    BIOMATERIALS, 2003, 24 (08) : 1365 - 1380
  • [38] Prediction of Mechanical Behavior for Carbon Black Added Natural Rubber Using Hyperelastic Constitutive Model
    Kim, Beomkeun
    ELASTOMERS AND COMPOSITES, 2016, 51 (04): : 308 - 316
  • [39] Stress and cracking behavior of plasma sprayed thermal barrier coatings using an advanced constitutive model
    Xie, WG
    Jordan, E
    Gell, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2): : 50 - 58
  • [40] Numerical study on the lateral behavior of pile groups in Toyoura sand using the hypoplastic constitutive model
    Li, Jiandong
    Zhang, Yuting
    Yuan, Guangzong
    Bian, Tianqi
    SCIENTIFIC REPORTS, 2024, 14 (01):