On the wrinkling of a pre-stressed annular thin film in tension

被引:52
|
作者
Coman, Ciprian D.
Bassom, Andrew P.
机构
[1] Univ Glasgow, Dept Math, Glasgow G12 8QW, Lanark, Scotland
[2] Univ Western Australia, Sch Math & Stat, Crawley 6009, Australia
关键词
thin films; wrinkling; boundary layers; asymptotics; turning points;
D O I
10.1016/j.jmps.2007.01.006
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Asymptotic properties of the neutral stability curves for a linear boundary eigenvalue problem which models the wrinkling instability of an annular thin film in tension are considered. The film is subjected to imposed radial displacement fields on its inner and outer boundaries and, when these loads are sufficiently large, the film is susceptible to wrinkling. The critical values at which this onset occurs are dictated by the solution of a fourth-order ordinary differential eigensystem whose eigenvalue lambda is a function of mu(>> 1), a quantity inversely proportional to the non-dimensional bending stiffness of the film, and n, the number of half-waves of the wrinkling pattern that sets in around the annular domain. Previously, Coman and Haughton [2006. Localised wrinkling instabilities in radially stretched annular thin films. Acta Mech. 185, 179-200] employed the compound matrix method together with a WKB technique to characterise the form of lambda(mu, n) which essentially is related to a turning point in a reduced eigenproblem. The asymptotic analysis conducted therein pertained to the case when this turning point was not too close to the inner edge of the annulus. However, in the thin film limit mu -> infinity, the wrinkling load and the preferred instability mode are given by a modified eigenvalue problem that involves a turning point asymptotically close to the inner rim. Here WKB and boundary-layer asymptotic methods are used to examine these issues and comparisons with direct numerical simulations made. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1601 / 1617
页数:17
相关论文
共 50 条
  • [21] STRESS DETECTION AND TENSION CONTROL TECHNIQUE OF PRE-STRESSED REINFORCEMENT AND ENGINEERING APPLICATION
    Yu, Zhiwu
    Zi, Wei
    Shi, Weihua
    INTERNATIONAL SYMPOSIUM ON LIFE-CYCLE PERFORMANCE OF BRIDGES AND STRUCTURES, 2010, : 1007 - 1009
  • [22] Anchor cable encircled modes of unbonded annular anchors for pre-stressed tunnel lining
    Pi, Jin
    Cao, Ruilang
    Zhao, Yufei
    Jia, Zhixin
    APPLIED MECHANICS AND CIVIL ENGINEERING VI, 2017, : 125 - 132
  • [23] Torsional wave propagation in a pre-stressed circular cylinder embedded in a pre-stressed elastic medium
    Ozturk, A.
    Akbaro, S. D.
    APPLIED MATHEMATICAL MODELLING, 2009, 33 (09) : 3636 - 3649
  • [24] Finite-amplitude shear wave in pre-stressed thin elastomers
    Nemat-Nasser, S
    Amirkhizi, AV
    WAVE MOTION, 2005, 43 (01) : 20 - 28
  • [25] Acoustoelastic analysis of thin pre-stressed films by the stiffness matrix method
    Wali, Y.
    Njeh, A.
    Ben Ghozlen, M. H.
    MECHANICS RESEARCH COMMUNICATIONS, 2007, 34 (03) : 295 - 304
  • [26] ABRASION RESISTANCE OF PRE-STRESSED AND STRESSED RUBBER VULCANIZATES
    LAMBERT, DH
    BOONSTRA, BB
    JOURNAL OF APPLIED POLYMER SCIENCE, 1970, 14 (01) : 11 - &
  • [27] CCR FOR PRE-STRESSED STRAND.
    Kusovsky, D.
    Wire Industry, 1987, 54 (638): : 131 - 132
  • [28] RAY THEORY FOR PRE-STRESSED MEDIA
    BOSCHI, E
    DICURZIO, E
    ANNALI DI GEOFISICA, 1975, 28 (01): : 97 - 110
  • [29] Structural innovation in pre-stressed brickwork
    Pedreschi, R
    CONSTRUCTION AND BUILDING MATERIALS, 2004, 18 (02) : 99 - 109
  • [30] CONTACT HARDNESS OF PRE-STRESSED SURFACES
    AKHMATOV, VA
    RUSSIAN ENGINEERING JOURNAL, 1976, 56 (07): : 25 - 28