Performance of fluidized bed steam gasification of biomass - Modeling and experiment

被引:186
|
作者
Loha, Chanchal [1 ]
Chatterjee, Pradip K. [1 ]
Chattopadhyay, Himadri [2 ]
机构
[1] CSIR, Cent Mech Engn Res Inst, Thermal Engn Grp, Durgapur 713209, India
[2] Jadavpur Univ, Dept Mech Engn, Kolkata 700032, India
关键词
Gasification; Biomass; Fluidized bed; Equilibrium modeling; EQUILIBRIUM-MODEL; STATIONARY STATE; EXERGY ANALYSIS; GASIFIER; SIMULATION; PARTICLES; COAL;
D O I
10.1016/j.enconman.2010.11.003
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper presents the investigation of the performance from different biomasses in a fluidized bed gasifier where steam has been used as gasifying as well as fluidizing agent. An experimental setup is fabricated to study the gasification performance of rice husk, which is of special relevance to rice-producing countries like China and India. An equilibrium modeling approach is deployed to predict the gas composition which has been compared with the experimental results. Calibration of the model with appropriate modeling coefficients was necessary to achieve close resemblance with the experimental values. Further, the model is used to predict the gas compositions from other biomass and benchmarked with the performance of coal. In this study, the gasification temperature is varied from 650 degrees C to 800 degrees C, whereas the steam-to-biomass ratio (S/B) is varied from 0.75 to 2.00. As the gasification temperature increases, the production of H-2 and CO increases but the generation of CH4 and CO2 reduces. The steam-to-biomass ratio was again found to influence the production rates. With increasing steam input, H-2. CO2 and CH4 were found to increase while CO reduces. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1583 / 1588
页数:6
相关论文
共 50 条
  • [31] Sequence-based Process Modeling of Fluidized Bed Biomass Gasification
    Asadi-Saghandi, Hamid
    Sheikhi, Amir
    Sotudeh-Gharebagh, Rahmat
    [J]. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2015, 3 (11): : 2640 - 2651
  • [32] Evaluation of different biomass gasification modeling approaches for fluidized bed gasifiers
    Mirmoshtaghi, Guilnaz
    Li, Hailong
    Thorin, Eva
    Dahlquist, Erik
    [J]. BIOMASS & BIOENERGY, 2016, 91 : 69 - 82
  • [33] Study on coal gasification in steam fluidized bed
    Cui, Lin
    Shen, Youting
    Li, Dingkai
    Guo, Bing
    Zhao, Fu
    [J]. Huagong Yejin/Engineering Chemistry & Metallurgy, 1997, 18 (02): : 97 - 103
  • [34] Gasification of food waste with steam in fluidized bed
    Moon Kyu Ko
    Won-Young Lee
    Seong-Bo Kim
    Kyu-Wan Lee
    Hai-Soo Chun
    [J]. Korean Journal of Chemical Engineering, 2001, 18 : 961 - 964
  • [35] Fluidized bed steam gasification of solid biomass -: Performance characteristics of an 8 MWth combined heat and power plant
    Proell, Tobias
    Rauch, Reinhard
    Aichernig, Christian
    Hofbauer, Hermann
    [J]. INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2007, 5
  • [36] Gasification of food waste with steam in fluidized bed
    Ko, MK
    Lee, WY
    Kim, SB
    Lee, KW
    Chun, HS
    [J]. KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2001, 18 (06) : 961 - 964
  • [37] Steam-air fluidized bed gasification of distillers grains: Effects of steam to biomass ratio, equivalence ratio and gasification temperature
    Kumar, Ajay
    Eskridge, Kent
    Jones, David D.
    Hanna, Milford A.
    [J]. BIORESOURCE TECHNOLOGY, 2009, 100 (06) : 2062 - 2068
  • [38] Investigation on biomass steam gasification in a dual fluidized bed reactor with the granular kinetic theory
    Yan, Linbo
    Cao, Yang
    Zhou, Hongzhiyuan
    He, Boshu
    [J]. BIORESOURCE TECHNOLOGY, 2018, 269 : 384 - 392
  • [39] Heat integration and waste minimization of biomass steam gasification in a bubbling fluidized bed reactor
    Hejazi, Bijan
    [J]. BIOMASS & BIOENERGY, 2022, 159
  • [40] Simulation study on influence of steam on co-gasification of biomass and coal in a fluidized bed
    Che, Deyong
    Han, Ningning
    Li, Shaohua
    Liu, Hui
    [J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2013, 33 (32): : 40 - 45