CNC turning process parameters optimization on Aluminium 6082 alloy by using Taguchi and ANOVA

被引：71
|
作者：
Palaniappan, S. P. [1 ]
Muthukumar, K. [1 ]
Sabariraj, R. V. [2 ]
Kumar, S. Dinesh [3 ]
Sathish, T. [4 ]
机构：
[1] Chendhuran Coll Engn & Technol, Dept Mech Engn, Pudukkottai 622507, Tamil Nadu, India
[2] Lakshmi Subramanian Polytech Coll, Dept Mech Engn, Madurai 625324, Tamil Nadu, India
[3] St Peters Inst Higher Educ & Res, Chennai 600054, Tamil Nadu, India
[4] SMR East Coast Coll Engn & Technol, Thanjavur 614612, Tamil Nadu, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Al6082; Turing parameters; Optimization; Taguchi; ANOVA; Chip temperature; DIESEL;
D O I：
10.1016/j.matpr.2019.10.053
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper experimentally investigates the machining of Aluminium 6082 alloy to identify the optimal parameters for CNC turning process. A plan of experiments based on L27 orthogonal array was established and turning experiments were conducted with prefixed cutting parameters for Aluminium 6082 using tungsten carbide cutting tool. The turning parameters were spindle speed, feed rate and depth of cut for the responses of surface roughness and material removal rate by using Taguchi and ANOVA and also the temperature on chip compared for each experimental condition. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1013 / 1021
页数：9
相关论文
共 50 条
  • [21] Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique
    Lakshminarayanan, A. K.
    Balasubramanian, V.
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2008, 18 (03) : 548 - 554
  • [22] Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique
    A.K.LAKSHMINARAYANAN
    V.BALASUBRAMANIAN
    [J]. Transactions of Nonferrous Metals Society of China, 2008, (03) : 548 - 554
  • [23] Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA
    Qasim, Arsalan
    Nisar, Salman
    Shah, Aqueel
    Khalid, Muhammad Saeed
    Sheikh, Mohammed A.
    [J]. SIMULATION MODELLING PRACTICE AND THEORY, 2015, 59 : 36 - 51
  • [24] Modelling of extrusion process and application of Taguchi method and ANOVA analysis for optimization the parameters
    Hosseini, A.
    Farhangdoost, Kh.
    Manoochehri, M.
    [J]. MECHANIKA, 2012, (03): : 301 - 305
  • [25] Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing
    Ozdemir, Mustafa
    [J]. MECHANIKA, 2019, 25 (05): : 397 - 405
  • [26] Experimental investigation of process parameters for turning aluminum using ANOVA
    Bindhushree, B. S.
    Arunadevi, M.
    Prakash, C. P. S.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 5060 - 5066
  • [27] APPLICATION OF TAGUCHI AND ANOVA IN OPTIMIZATION OF PROCESS PARAMETERS OF LAPPING OPERATION FOR CAST IRON
    Parate, P. R.
    Yarasu, R. B.
    [J]. JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2013, 4 : 479 - 487
  • [28] Influence of Process Parameters on CNC Turning of Aluminium Hybrid Metal Matrix Composites
    Nataraj, M.
    Balasubramanian, K.
    Palanisamy, D.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (06) : 14499 - 14506
  • [29] Turning parameters optimization for TC21 Ti-alloy using Taguchi technique
    Sobh, Arafa S.
    Sayed, Esraa M.
    Barakat, Azzz F.
    Elshaerr, Ramadan N.
    [J]. BENI-SUEF UNIVERSITY JOURNAL OF BASIC AND APPLIED SCIENCES, 2023, 12 (01)
  • [30] Turning parameters optimization for TC21 Ti-alloy using Taguchi technique
    Arafa S. Sobh
    Esraa M. Sayed
    Azzz F. Barakat
    Ramadan N. Elshaerr
    [J]. Beni-Suef University Journal of Basic and Applied Sciences, 12
12345