INTEGRATION OF ACTUATORS BY ADDITIVE LAYER MANUFACTURING

被引：0
|
作者：
Riemenschneider, Johannes [1 ]
Mitkus, Rytis [1 ]
Vasista, Srinivas [1 ]
机构：
[1] German Aerosp Ctr DLR, Inst Composite Struct & Adapt Syst, Lilienthalpl 7, D-38108 Braunschweig, Germany
来源：
PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2017, VOL 2 | 2017年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Additive Layer Manufacturing is offering tremendous oportunities for manufacturing. Many complex structures, which could not be manufactured by conventional methods can be produced additive. This paper gives three examples of how additive manufacturing can be used to built smart structures with integrated actuators and sensors. The integration of piezoceramic actuators into FDM and SLM processes is described as well as the design of structures with integrated pneumatic actuators printed with the PolyJet method.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Hierarchical Integration of Thin-Film NiTi Actuators Using Additive Manufacturing for Microrobotics
    Velez, Camilo
    Patel, Dinesh K.
    Kim, Sukjun
    Babaei, Mahnoush
    Knick, Cory R.
    Smith, Gabriel L.
    Bergbreiter, Sarah
    [J]. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2020, 29 (05) : 867 - 873
  • [2] Integration of additive manufacturing – challenges with the integration of additive manufacturing in the entrepreneurial value added chain
    Integration additiver Fertigungstechnologien: Herausforderungen bei der Integration von additiven Fertigungstechnologien in unternehmerische Wertschöpfungsketten
    [J]. 2018, Carl Hanser Verlag (113): : 1 - 2
  • [3] Soft Actuators and Robots Enabled by Additive Manufacturing
    Wang, Dong
    Wang, Jinqiang
    Shen, Zequn
    Jiang, Chengru
    Zou, Jiang
    Dong, Le
    Fang, Nicholas X.
    Gu, Guoying
    [J]. ANNUAL REVIEW OF CONTROL ROBOTICS AND AUTONOMOUS SYSTEMS, 2023, 6 : 31 - 63
  • [4] Additive Manufacturing of Flexible Material for Pneumatic Actuators Application
    Fateri, Miranda
    Carneiro, Joao Falcao
    Frick, Achim
    Pinto, Joao Bravo
    de Almeida, Fernando Gomes
    [J]. ACTUATORS, 2021, 10 (07)
  • [5] Exploring Challenges in the Integration of Additive Manufacturing
    Gustafsson, Christopher
    Sanno, Anna
    Bruch, Jessica
    Chirumalla, Koteshwar
    [J]. ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: SMART MANUFACTURING AND LOGISTICS SYSTEMS: TURNING IDEAS INTO ACTION, APMS 2022, PT I, 2022, 663 : 370 - 379
  • [6] Integration of additive manufacturing in the product engineering
    Brandis, Rinje
    Wanzek, Anna-Lena
    Schneider, Marcel
    Gausemeier, Jürgen
    [J]. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2016, 111 (11): : 718 - 722
  • [7] Local Layer Splitting: An Additive Manufacturing Method to Define the Mechanical Properties of Soft Pneumatic Actuators During Fabrication
    Parilusyan, Brice
    Teyssier, Marc
    Guillaume, Zacharie
    Charlet, Thibault
    Duhart, Clement
    Serrano, Marcos
    [J]. 2023 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA 2023), 2023, : 12331 - 12337
  • [8] A Design Framework for Additive Manufacturing: Integration of Additive Manufacturing Capabilities in the Early Design Process
    Sarath C. Renjith
    Kijung Park
    Gül E. Okudan Kremer
    [J]. International Journal of Precision Engineering and Manufacturing, 2020, 21 : 329 - 345
  • [9] A Design Framework for Additive Manufacturing: Integration of Additive Manufacturing Capabilities in the Early Design Process
    Renjith, Sarath C.
    Park, Kijung
    Okudan Kremer, Gul E.
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2020, 21 (02) : 329 - 345
  • [10] Induction of anisotropic motions in dielectric elastomer actuators by additive manufacturing
    Martin, S.
    Riethmtiller, J.
    Weigand, C.
    Reitelshoefer, S.
    Franke, J.
    [J]. ELECTROACTIVE POLYMER ACTUATORS AND DEVICES (EAPAD) XXIV, 2022, 12042
12345