Isothermal sections of the Co-Ni-Ti system at 950 and 1000 °C

被引:3
|
作者
Li, Han [1 ]
Zhou, Peng [2 ]
Du, Yong [3 ]
Jin, Zhanpeng [1 ]
机构
[1] Cent S Univ, Sch Mat Sci & Engn, Changsha, Hunan, Peoples R China
[2] Hunan Univ Sci & Technol, Hunan Prov Key Def Lab High Temp Wear Resisting M, Xiangtan 411201, Peoples R China
[3] Cent S Univ, State Key Lab Powder Met, Changsha, Hunan, Peoples R China
关键词
Co-Ni-Ti ternary system; Phase diagram; XRD; EPMA; MUTUAL DIFFUSION; KINETICS; ALLOYS;
D O I
10.3139/146.111587
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The isothermal sections of the Co-Ni-Ti system at 950 and 1000 degrees C were investigated experimentally. Diffusion couples were measured by electron probe microanalysis to construct the phase relations at 950 degrees C, whereas eleven key alloys annealed at 1000 degrees C were investigated using X-ray diffraction and electron probe microanalysis. The ternary phase, tau-(Co, Ni)(3)Ti (hP24-VCo3), was observed at both temperatures. At 950 degrees C, continuous solid solutions are formed between CoTi2 and NiTi2 as well as between CoTi and NiTi. Eight 3-phase regions, i.e. Ni3Ti + (Co, Ni) Ti + tau, Ni3Ti + gamma-(Co, Ni) + tau, tau + c-Co2Ti + (Co, Ni)Ti, tau + c-Co2Ti + Co3Ti, tau + Co3Ti + gamma-(Co, Ni), c-Co2Ti + h-Co2Ti + Co3Ti, L + beta-(Ti) + (Co, Ni)Ti-2 and L + (Co, Ni)Ti-2 + (Co, Ni) Ti, were constructed at 1000 degrees C. Considerable ternary solubilities in Ni3Ti, Co3Ti and c-Co2Ti were determined.
引用
收藏
页码:105 / 112
页数:8
相关论文
共 50 条
  • [21] Critical assessment and experimental investigation of Co-Ni-Ti phase equilibria
    Riani, Paola
    Sufryd, Katarzyna
    Cacciamani, Gabriele
    CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 2014, 44 : 26 - 38
  • [22] Phase equilibria of the Co-Ta-Ti system at 950 °C
    Xu, Honghui
    Xiong, Xiang
    Du, Yong
    Wang, Peisheng
    Hu, Biao
    He, Yuehui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 485 (1-2) : 249 - 254
  • [23] Phase equilibria of the Co-Ta-Ti system at 950 °C
    Xu, Honghui
    Xiong, Xiang
    Du, Yong
    Wang, Peisheng
    Hu, Biao
    He, Yuehui
    Journal of Alloys and Compounds, 2009, 485 (1-2): : 249 - 254
  • [24] Phase equilibria of the Co-Mo-Ti system at 950 °C
    State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, China
    不详
    Journal of Alloys and Compounds, 2008, 457 (1-2): : 259 - 264
  • [25] Phase equilibria of the Co-Mo-Ti system at 950°C
    Xu, Honghui
    Du, Yong
    Zhang, Lijun
    Li, Shitong
    Jin, Zhanpeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 457 (1-2) : 259 - 264
  • [26] 600 and 450 °C isothermal sections of the Zn–Ce–Ti system
    Wu, Changjun (wucj@cczu.edu.cn), 1600, Elsevier Ltd (709):
  • [27] The 450 °c and 600 °c isothermal sections of the Zn-Ti-Si system
    Su, X. (sxping@cczu.edu.cn), 1600, Elsevier Ltd (616):
  • [28] The 450 °C and 600 °C isothermal sections of the Zn-Ti-Si system
    Tu, Hao
    Zhao, Qun
    Liu, Ya
    Wang, Jianhua
    Su, Xuping
    Liu, Shupei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 616 : 594 - 600
  • [29] Investigation of isothermal sections at 1000 and 600°C in the Pt-Cr-Ru system
    Suess, R.
    Cornish, L. A.
    Witcomb, M. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 457 (1-2) : 310 - 322
  • [30] Isothermal sections in the Cr–Ga–N system in the 650–1000 °C temperature range
    L. Farber
    M. W. Barsoum
    Journal of Materials Research, 1999, 14 : 2560 - 2566