Optimization of biodiesel production from crude palm oil using ultrasonic irradiation assistance and response surface methodology

BACKGROUND: Production of biodiesel from crude palm oil (CPO) with 6 wt% of free fatty acid (FFA) using a low-frequency ultrasonic irradiation (40 kHz) technique was investigated in the present work. The objective of this study was to determine the relationship between various important parameters of the alkaline catalyzed transesterification process to obtain a high conversion to biodiesel. Response surface methodology (RSM) was used to statistically analyze and optimize the operating parameters of the process. A central composite design (CCD) was adopted to study the effects of the methanol to oil molar ratio, the catalyst concentration, reaction temperature, and irradiation time on conversion to biodiesel. RESULTS: The result from the RSM analysis indicated that the methanol to oil molar ratio, catalyst concentration and irradiation time have the most significant effects on the conversion to biodiesel. Moreover, a coefficient of determination (R-2) value of 0.93 shows the fitness of a second-order model for the present study. Based on this second-order model, the optimum conditions for alkaline catalyzed transesterification of CPO were found to be a methanol to oil molar ratio of 6.44 : 1, catalyst concentration 1.25 wt%, reaction temperature 38.44 degrees C and irradiation time 25.96 min. At the calculated optimum condition, the conversion to biodiesel reached 97.85%. Under these same conditions, the experimental value was 98.02 +/- 0.6%. CONCLUSIONS: The mathematical model developed has been proven to adequately describe the range of the experimental parameters studied and provide a statistically accurate prediction of the optimum conversion to biodiesel. (C) 2011 Society of Chemical Industry