A hybrid moment of fluid-level set framework for simulating primary atomization

This paper presents a hybrid moment of fluid-level set (HyMOFLS) method of liquid/gas interface reconstruction for the application to simulate primary atomization of liquid fuel. This method combines the moment of fluid (MOF) method and the level set framework in the coupled level set volume of fluid (CLSVOF) method. In this hybrid method, the MOF and CLSVOF methods are used to reconstruct the interface in the under-resolved and the resolved regions of the flow, respectively. An interface surface resolution metric called interface resolution quality (IRQ) is introduced to identify and classify these two flow regions in the computational domain. Such a strategy classifies/tags each computational cell with MOF or CLSVOF method based on a threshold value for the IRQ. The MOF method uses liquid volume fraction as well as centroids of liquid and gas phases for the interface reconstruction. The CLSVOF method uses the level set for describing the interface and liquid volume fraction for conserving the mass. The phase centroids in the HyMOFLS method are computed and transported on-the-fly during the cell tagging process. The transport of the liquid volume fraction, level set, and the phase centroids are performed using a directionally split algorithm. This algorithm is coupled with the Navier-Stokes equations solver that uses ghost fluid method as well as consistent mass and momentum flux computation for the momentum equation. Various numerical tests that exhaustively assess the capabilities, accuracy, and computational time consumption of the HyMOFLS method under multiple flow conditions and configurations are presented. The results from these tests suggest that this hybrid framework is capable of well capturing the liquid/gas interface belonging to thin and under-resolved structures that are often encountered in simulations of turbulent atomization of liquids. Following these tests, a detailed parametric study on the threshold value of IRQ is presented to test its effect on the accuracy of interface reconstruction. Finally, this hybrid framework is employed to simulate turbulent jet injection and pre-filming planar Airblast atomization cases of engineering applications. The proposed HyMOFLS method is found to achieve a good balance between the accuracy and the computational cost of reconstructing the liquid/gas interface for complex and turbulent atomization configurations. (C) 2021 Elsevier Inc. All rights reserved.