Cylindrical Al2O3/TZP functionally graded materials by EPD

被引：13

作者：

Zhao, C ^{[1
]}

Vandeperre, L ^{[1
]}

Vleugels, J ^{[1
]}

Van Der Biest, O ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Heverlee, Belgium

来源：

BRITISH CERAMIC TRANSACTIONS | 2000年 / 99卷 / 06期

关键词：

D O I：

10.1179/096797800681018

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Cylindrical Al2O3/Ce-TZP functionally graded composites were fabricated by electrophoretic deposition and pressureless sintering in air. Negatively charged Ce-TZP and Al2O3 powders were deposited on a cylindrical electrode from an acetone based suspension. A continuous composition change is realised by changing the composition of the suspension. Sintering of the FGM at different temperatures, showed that a temperature higher than 1550 degreesC was necessary for densification. The resultant FGM cylinder with 5.6 mm dia. had an ideal mechanical structure: a central open channel, a tough Ce-ZrO2 core (K-Ic > 10 MPa m(1/2)). a continuous gradient interlayer, and a hard surface layer with HV higher than 15 GPa. BCT/443.

引用

页码：284 / 287

页数：4

共 50 条

[41] Electrodeposition of Ni-Fe-Mn/Al2O3 functionally graded nanocomposite coatings
Torabinejad, V.
Aliofkhazraei, M.
Rouhaghdam, A. S.
Allahyarzadeh, M. H.
SURFACE ENGINEERING, 2017, 33 (02) : 122 - 130
[42] Thermal and Structural Analysis of Functionally Graded NiCrAlY/YSZ/Al2O3 Coated Piston
Pandian, Sakthinathan Ganapathy
Rengarajan, Srivathsan Puzhuthivakkam
Babu, Terrin P.
Natarajan, Vignesh
Kanagasabesan, Harikrishnan
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2015, 8 (02) : 578 - 585
[43] Fabrication of ZrO2/Ni and ZrO2/Al2O3 functionally graded materials by explosive powder consolidation technique
Chiba, A
Nishida, M
Imamura, K
Ogura, H
Morizono, Y
FUNCTIONALLY GRADED MATERIALS 1996, 1997, : 191 - 195
[44] Experimental and numerical flexural analysis of porous functionally graded beams reinforced by (Al/Al2O3) nanoparticles
Njim, Emad Kadum
Bakhy, Sadeq H.
Al-Waily, Muhannad
INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, 2022, 15 (02): : 91 - 106
[45] Al2O3-Fe functionally graded materials fabricated under magnetic field
Ozieblo, A
Konopka, K
Bobryk, E
Szafran, M
Kurzydlowski, KJ
BULK AND GRADED NANOMETALS, 2005, 101-102 : 143 - 146
[46] FABRICATION AND PROPERTIES OF (Y, CE)-TZP AL2O3 AND Y-TZP AL2O3 COMPOSITES FROM FINE POWDERS PREPARED BY A HYDROLYSIS TECHNIQUE
HIRANO, M
INADA, H
NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1991, 99 (02): : 124 - 130
[47] SYNTHESIS PROCESS AND MICROSTRUCTURE FOR Al2O3/TiC/Ti FUNCTIONALLY GRADIENT MATERIALS
Rocha-Rangel, Enrique
Hernandez-Silva, David
Refugio-Garcia, Elizabeth
Miranda-Hernandez, Jose G.
Terres-Rojas, Eduardo
DESIGN, DEVELOPMENT, AND APPLICATIONS OF ENGINEERING CERAMICS AND COMPOSITES, 2010, 215 : 207 - +
[48] Effect of Al2O3 on the phase stability of Y-Ce-TZP/Al2O3 composites at low temperature
Lin, Xuping
Ma, Jingtao
Zhang, Baoqing
Lin, Qiang
High-Performance Ceramics IV, Pts 1-3, 2007, 336-338 : 1190 - 1193
[49] Experimental study of functionally graded materials of Fe/Al2O3 compound coatings on the steel substrate by using the laser ultrasound method
Sun Kai-hua
Yuan Ling
Shen Zhong-hua
Ni Xiao-wu
INTERNATIONAL SYMPOSIUM ON PHOTOELECTRONIC DETECTION AND IMAGING 2011: LASER SENSING AND IMAGING AND BIOLOGICAL AND MEDICAL APPLICATIONS OF PHOTONICS SENSING AND IMAGING, 2011, 8192
[50] Fabrication of crack-free SUS316L/Al2O3 functionally graded materials by spark plasma sintering
Radwan, M.
Nygren, M.
Flodstrom, K.
Esmaelzadeh, S.
JOURNAL OF MATERIALS SCIENCE, 2011, 46 (17) : 5807 - 5814

← 1 2 3 4 5 →