Study on tensile, electrical, and thermal properties of aluminium particle filled natural rubber (NR) and ethylene-propylene-diene terpolymer (EPDM) composites

被引：6

作者：

Anuar, J. ^{[1
]}

Mariatti, M. ^{[1
]}

Ismail, H. ^{[1
]}

机构：

[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, George Town, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2007年 / 46卷 / 10-12期

关键词：

aluminium filler; EPDM; electrical properties; natural rubber; rubber composites;

D O I：

10.1080/03602550701575920

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Comparative studies on the effect of aluminium particles in natural rubber (NR) and ethylene-propylene-diene terpolymer (EPDM) were conducted. The incorporation of aluminium particles in NR or EPDM composites increased the cure time, t(90), and scorch time, t(S2). At a fixed filler loading, EPDM composites exhibited longer t(90) and t(S2) than NR composites. The results also indicate that the maximum torque, Mu of aluminium filled NR and EPDM composites increase with increasing filler loading. For tensile properties, EPDM composites show lower tensile properties than NR composites. Thermogravimetric analysis (TGA) results show that aluminium filled EPDM composites have better thermal stability than aluminium filled NR composites. The results for electrical properties indicate that the electrical properties of aluminium filled NR and EPDM composites increase with increase in filler loading.

引用

页码：1201 / 1206

页数：6

共 50 条

[21] BLENDS OF EPDM AND SULFONATED ETHYLENE-PROPYLENE-DIENE (EPDM) RUBBER WITH POLYPROPYLENE - STRUCTURE, PHYSICAL, AND RHEOLOGICAL PROPERTIES
DUVDEVANI, I
AGARWAL, PK
LUNDBERG, RD
POLYMER ENGINEERING AND SCIENCE, 1982, 22 (08): : 499 - 506
[22] Thermal characterization of oil extracted from ethylene-propylene-diene terpolymer residues (EPDM-r)
Pistor, V.
Ornaghi, F. G.
Fiorio, R.
Zattera, A. J.
THERMOCHIMICA ACTA, 2010, 510 (1-2) : 93 - 96
[23] Effect of borax on the thermal and mechanical properties of ethylene-propylene-diene terpolymer rubber-based heat insulator
Farajpour, Tohid
Bayat, Yadollah
Abdollahi, Mahdi
Keshavarz, Mohammad Hossein
JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (19)
[24] Ethylene-propylene-diene terpolymer/hexa fluoropropylene-vinylidinefluoride dipolymer rubber blends: Thermal and mechanical properties
Nair, Ajalesh Balachandran
Kurian, Philip
Joseph, Rani
MATERIALS & DESIGN, 2012, 36 : 767 - 778
[25] Effect of borax on the thermal and mechanical properties of ethylene-propylene-diene terpolymer rubber-based heat insulator
20150500477147
Abdollahi, Mahdi (abdollahim@modares.ac.ir), 1600, John Wiley and Sons Inc (132):
[26] Modified ethylene-propylene-diene elastomer (EPDM)-contained silicone rubber/ethylene-propylene-diene elastomer (EPDM) blends: Effect of composition and electron beam crosslinking on mechanical, heat shrinkability, electrical, and morphological properties
Fuke, Chandan Ashokrao
Mahanwar, Prakash Anna
Chowdhury, Subhendu Ray
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (29)
[27] Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer (EPDM) nanocomposites
Ismail, H.
Pasbakhsh, Pooria
Fauzi, M. N. Ahmad
Abu Bakar, A.
POLYMER TESTING, 2008, 27 (07) : 841 - 850
[28] Effects of peroxide and phenolic cure systems on characteristics of the filled ethylene-propylene-diene monomer rubber (EPDM)
Imanifar, Marzieh
Movahed, Saeed Ostad
Ahmadpour, Ali
JOURNAL OF APPLIED POLYMER SCIENCE, 2018, 135 (21)
[29] Advanced Ethylene-Propylene-Diene (EPDM) Rubber Composites Filled with Raw Silicon Carbide or Hybrid Systems with Different Conventional Fillers
Bartosik, Dominik
Szadkowski, Boleslaw
Kusmierek, Malgorzata
Rybinski, Przemyslaw
Mirkhodzhaev, Ulugbek
Marzec, Anna
POLYMERS, 2022, 14 (07)
[30] Comparison of Ethylene-Propylene Diene Terpolymer Composites Filled with Natural and Synthesized Micas
Wang, Lei-Lei
Tong, Yun-Peng
Zhang, Li-Qun
Tian, Ming
JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 116 (06) : 3184 - 3192

← 1 2 3 4 5 →