Dose monitoring of heavy ion implantation by Therma-Wave signal

被引：0
|
作者：
Sano, M [1 ]
Harada, M [1 ]
Kabasawa, M [1 ]
Sato, F [1 ]
Sugitani, M [1 ]
机构：
[1] Sumitomo Eaton Nova Corp, Prod Engn, Toyo, Ehime 7991362, Japan
来源：
IIT2002: ION IMPLANTATION TECHNOLOGY, PROCEEDINGS | 2003年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dosimetry of ion implantation is monitored mainly by Therma-Wave (TW) signals for low-medium dose ranges. Repeatability and uniformity of TW signals for indiurn (In) and antimony (Sb) implantation were researched in order to improve dose monitoring accuracy. It was found that TW signals were influenced considerably by implant conditions, wafer surface status, and TW measurement parameters. Because TW signals have high dose sensitivity in some ranges of In and Sb implantation, TW signals became a good tool of dose monitoring of such heavy ions by establishing appropriate management of the above conditions.
引用
收藏
页码：248 / 251
页数：4
相关论文
共 50 条
  • [1] Therma-Wave measures up
    不详
    MICRO, 1996, 14 (04): : 29 - 29
  • [2] Therma-Wave measures up
    不详
    MICRO, 1997, 15 (05): : 36 - 36
  • [3] Siemens catches Therma-Wave
    不详
    MICRO, 1996, 14 (10): : 22 - 22
  • [4] Stability improvement of Therma-Wave signal by pre-annealing
    Harada, M
    Sano, M
    Izutani, H
    IIT2002: ION IMPLANTATION TECHNOLOGY, PROCEEDINGS, 2003, : 252 - 255
  • [5] Therma-wave dose sensitivity considerations, including energy dependence
    Kamenitsa, D
    Lillian, P
    Luckman, G
    Becker, K
    Colvin, N
    Rendon, M
    Bokharey, Z
    2000 INTERNATIONAL CONFERENCE ON ION IMPLANTATION TECHNOLOGY, PROCEEDINGS, 2000, : 674 - 677
  • [6] Use of the temperature dependence of the therma-wave technique as a thermometer
    Nucl Instrum Methods Phys Res Sect B, 1-4 (583):
  • [7] USE OF THE TEMPERATURE-DEPENDENCE OF THE THERMA-WAVE TECHNIQUE AS A THERMOMETER
    RATHMELL, RD
    KAMENITSA, D
    BRUBAKER, S
    REECE, R
    PEARCE, NO
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1995, 99 (1-4): : 583 - 586
  • [8] A technique for determining beam parallelism on a medium current implanter using the Therma-Wave Therma-Probe
    Kamenitsa, DE
    Rathmell, RD
    McCoy, WR
    Lillian, PK
    King, ML
    Simonton, RB
    ION IMPLANTATION TECHNOLOGY - 96, 1997, : 233 - 236
  • [9] MONITORING OF DOSE IN LOW-DOSE ION-IMPLANTATION
    HARA, T
    HAGIWARA, H
    ICHIKAWA, R
    SMITH, WL
    WELLES, C
    HAHN, SK
    LARSON, L
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1991, 55 (1-4): : 250 - 252
  • [10] USING A WEDGE OXIDE TO MONITOR LOW-ENERGY BEAM PURITY BY MEANS OF THERMA-WAVE MEASUREMENTS IN THE EATEN NV-8200P ION IMPLANTER
    KAMENITSA, DE
    PEARCE, NO
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1995, 96 (1-2): : 18 - 21
12345