NUMERICAL ANALYSIS OF WATER SUCTION EFFECT ON LIFT AND DRAG COEFFICIENT OF A HYDROFOIL WITH CAVITATION

被引:0
|
作者
Izadi, Mohammad J.
机构
关键词
UNSTEADY CAVITATION; MODEL;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Cavitation is the formation of the vapor bubbles within a liquid where the flow dynamics, cause the local static pressure to drop below the vapor pressure. This phenomenon can cause undesirable effects on the hydrofoils such as a decrease in the lift and an increase in the drag. In the present study, the unsteady cavitating flow over a 3-D hydrofoil is numerically simulated. The purpose of this work is to investigate the effect of the upper surface suction in the cavitation area on the lift and drag coefficients of a hydrofoil. An unsteady uniform flow of water over a 3-D NACA hydrofoil is numerically simulated. The full cavitation model along with the RNG k-epsilon turbulence model is implemented. A modification to the turbulent viscosity, which is necessary to simulate the cloud cavitation, is implemented. The simulation is implemented for various angles of attack and various suction velocities. Comparison between some experimental data and the numerical simulation obtained here is done in order to validate the numerical results. The results obtained here show that, as the mass flow of the water suction increases, the drag coefficient is decreased for large angles of attack, but for small angles of attack it does not change as much. As the mass flow of the water suction increases, the lift coefficient is decreased for small angles of attack and for larger angles of attack the lift coefficient is increased.
引用
收藏
页码:1095 / 1103
页数:9
相关论文
共 50 条
  • [31] NUMERICAL ANALYSIS OF HYDROFOIL NACA0015'S CAVITATION CHARACTERISTICS BASED ON THE THERMODYNAMIC EFFECTS
    Liu, Demin
    Liu, Shuhong
    Wu, Yulin
    Xu, Hongyuan
    MODERN PHYSICS LETTERS B, 2010, 24 (13): : 1499 - 1502
  • [32] Numerical 3D analysis of cloud cavitation shedding frequency on a circular leading edge hydrofoil with a barotropic cavitation model
    Blume, M.
    Skoda, R.
    9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015), 2015, 656
  • [33] Effect of air drag coefficient on motion and evaporation of water droplet
    Bai, Geng
    Yan, Hai-Jun
    Shuili Xuebao/Journal of Hydraulic Engineering, 2011, 42 (04): : 448 - 453
  • [34] Analysis of drag and lift coefficient expressions of bubbly flow system for low to medium Reynolds number
    Pang, Ming Jun
    Wei, Jin Jia
    NUCLEAR ENGINEERING AND DESIGN, 2011, 241 (06) : 2204 - 2213
  • [35] Numerical Investigation of the Angle of Attack Effect on Cloud Cavitation Flow around a Clark-Y Hydrofoil
    Peng, Di
    Chen, Guoqing
    Yan, Jiale
    Wang, Shiping
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2024, 139 (03): : 2947 - 2964
  • [36] NUMERICAL ANALYSIS OF THE UNSTEADY CAVITATION SHEDDING FLOW AROUND TWISTED HYDROFOIL BASED ON HYBRID FILTER MODEL
    Zhang, Desheng
    Chen, Jian
    Shi, Lei
    Zhang, Guangjian
    Shi, Weidong
    van Esch, Bart P. M.
    THERMAL SCIENCE, 2018, 22 (04): : 1629 - 1636
  • [37] Numerical Analysis of Plasma Actuator for Drag Reduction and Lift Enhancement on NACA 4415 Airfoil
    Megawanto, Fadli C.
    Harinaldi
    Budiarso
    Julian, James
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON THERMOFLUIDS 2017 (THERMOFLUID 2017), 2018, 2001
  • [38] Experimental and numerical investigation on the effect of surface roughness on the drag coefficient of a spherical particle
    Tang, Xueyu
    Lu, Weiqin
    Zhou, Tuo
    Gao, Kaixuan
    Lyu, Junfu
    Ke, Xiwei
    CHEMICAL ENGINEERING SCIENCE, 2024, 298
  • [39] Determining the drag coefficient of a cylinder perpendicular to water flow by numerical simulation and field measurement
    Cao, Daomei
    Song, Liming
    Li, Jie
    Yuan, Junting
    Zhou, Yingqi
    OCEAN ENGINEERING, 2014, 85 : 93 - 99
  • [40] Numerical analysis of flow in a Francis turbine on an equal critical cavitation coefficient line
    Wu, Yulin
    Liu, Jintao
    Sun, Yuekun
    Liu, Shuhong
    Zuo, Zhigang
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (06) : 1635 - 1641