Bulk synchronous reluctance rotor: A novel design concept in electric motors

被引：0
|
作者：
Perigo, E. A. [1 ]
Tremelling, D. [1 ]
机构：
[1] ABB US Res Ctr, 1021 Main Campus Dr, Raleigh, NC 27606 USA
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2022年 / 560卷
关键词：
Crystallization; Permanent magnets; Soft magnetic materials; Synchronous reluctance motor;
D O I：
10.1016/j.jmmm.2022.169588
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A novel concept for constructing synchronous reluctance rotors is proposed. By implementing an amorphous alloy as initial soft magnetic lamination material, the anisotropy required for the proper rotor operation would be obtained by developing barriers with hard magnetic properties via localized crystallization. This approach would enable the in-situ manufacturing of permanent magnets with properties between ferrites and rare-earth (discrete) counterparts. Advantages and challenges of such concept are identified and discussed, paving the way to not only further unlocking the potential of the combination of nanocrystalline soft/hard magnetic materials, but also on energy efficiency and sustainability fronts.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] ROTOR DESIGN OPTIMIZATION OF SYNCHRONOUS RELUCTANCE MACHINE
    MATSUO, T
    LIPO, TA
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 1994, 9 (02) : 359 - 365
  • [22] Comparative study of inner and outer rotor bearingless synchronous reluctance motors
    Mukherjee, Victor
    Sokolov, Maxim
    Pippuri, Jenni
    Hinkkanen, Marko
    Belahcen, Anouar
    JOURNAL OF ENGINEERING-JOE, 2019, (17): : 4375 - 4379
  • [23] Analytical Model Including Rotor Eccentricity for Bearingless Synchronous Reluctance Motors
    Saarakkala, Seppo E.
    Mukherjee, Victor
    Sokolov, Maksim
    Hinkkanen, Marko
    Belahcen, Anouar
    2018 XIII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2018, : 1388 - 1394
  • [24] Characterization of axially laminated anisotropic-rotor synchronous reluctance motors
    Isaac, FN
    Arkadan, AA
    El-Antably, A
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 1999, 14 (03) : 506 - 511
  • [25] Parameters and torque ripple of synchronous reluctance motors with different rotor topology
    Todorov, George
    Stoev, Bozhidar
    2018 20TH INTERNATIONAL SYMPOSIUM ON ELECTRICAL APPARATUS AND TECHNOLOGIES (SIELA), 2018,
  • [26] Rotor Iron Losses in High-Speed Synchronous Reluctance Motors
    Castagnaro, Emanuel
    Bacco, Giacomo
    Bianchi, Nicola
    2018 XIII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2018, : 1310 - 1316
  • [27] Optimal rotor design of novel axial flux synchronous reluctance motor and validation
    Gercekcioglu, Harun Serhat
    Akar, Mehmet
    INTERNATIONAL TRANSACTIONS ON ELECTRICAL ENERGY SYSTEMS, 2021, 31 (05)
  • [28] Novel Rotor Design Optimization of Synchronous Reluctance Machine for Low Torque Ripple
    Moghaddam, Reza-Rajabi
    Magnussen, Freddy
    Sadarangani, Chandur
    2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2012, : 720 - 724
  • [29] Design Optimization With Multiphysics Analysis on External Rotor Permanent Magnet-Assisted Synchronous Reluctance Motors
    Bonthu, Sai Sudheer Reddy
    Choi, Seungdeog
    Baek, Jeihoon
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2018, 33 (01) : 290 - 298
  • [30] Design of Synchronous Reluctance Motors with Improved Power Factor
    Mohanarajah, T.
    Rizk, J.
    Nagrial, M.
    Hellany, A.
    2017 11TH IEEE INTERNATIONAL CONFERENCE ON COMPATIBILITY, POWER ELECTRONICS AND POWER ENGINEERING (CPE-POWERENG), 2017, : 340 - 345
12345