WASTE HEAT RECOVERY AT THE GLASS INDUSTRY WITH THE INTERVENTION OF BATCH AND CULLET PREHEATING

被引：16

作者：

Dolianitis, Ioannis ^{[1
]}

Giannakopoulos, Dionysios ^{[1
]}

Hatzilau, Christina-Stavrula ^{[2
]}

Karellas, Sotirios ^{[2
]}

Kakaras, Emmanuil ^{[1
,2
]}

Nikolova, Evelina ^{[3
]}

Skarpetis, Georgios ^{[3
]}

Christodoulou, Nikolaos ^{[3
]}

Giannoulas, Nikolaos ^{[3
]}

Zitounis, Theodoros ^{[3
]}

机构：

[1] Chem Proc & Energy Resources Inst CERTH CPERI, Ctr Res & Technol Hellas, Athens, Greece

[2] Natl Tech Univ Athens, Sch Mech Engn, Athens, Greece

[3] Drujba Glassworks, Sofia, Bulgaria

来源：

THERMAL SCIENCE | 2016年 / 20卷 / 04期

关键词：

energy efficiency; waste heat recovery; batch preheating; modeling; glass industry; CO2; emissions; CONDUCTIVITY;

D O I：

10.2298/TSCI151127079D

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A promising option to reduce the specific energy consumption and CO2 emissions at a conventional natural gas fired container glass furnace deals with the advanced utilization of the exhaust gases downstream the air regenerators by means of batch and cullet preheating. A 3-D computational model that simulates this process using mass and heat transfer equations inside a preheater has been developed. A case study for an efficient small-sized container glass furnace is presented dealing with the investigation of the impact of different operating and design configurations on specific energy consumption, CO2 emissions, flue gas energy recovery, batch temperature and preheater efficiency. In specific, the effect of various parameters is studied, including the preheater's dimensions, flue gas temperature, batch moisture content, glass pull, combustion air excess and cullet fraction. Expected energy savings margin is estimated to 12-15%.

引用

页码：1245 / 1258

页数：14

共 50 条

[21] Effect of finely disperse cullet on glass batch briquetting
N. I. Min’ko
E. A. Laz’ko
E. A. Doroganov
Glass and Ceramics, 2008, 65 : 305 - 309
[22] RECOVERY OF WASTE GLASS CULLET FOR RECYCLING PURPOSES BY MEANS OF ELECTRO-OPTICAL SORTERS
STIRLING, H
CONSERVATION & RECYCLING, 1977, 1 (02): : 209 - 219
[23] COLLECTION AND RECYCLING OF WASTE GLASS (CULLET) IN GLASS CONTAINER MANUFACTURE
COOK, RF
CONSERVATION & RECYCLING, 1978, 2 (01): : 59 - 69
[24] Analysis of waste heat recovery to steel scrap preheating in an enclosure vessel
Wang, T
Kawakami, M
Mori, K
Shahidan, SH
DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 329 - 332
[25] Waste heat recovery from metal casting and scrap preheating using recovered heat
Selvaraj, J.
Varun, V. S.
Vignesh
Vishwam, Vishnu
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 267 - 276
[26] GLASS-BATCH PREHEATING WITH FLUID BEDS
SAKHUJA, RK
COLE, WE
AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (03): : 408 - 408
[27] RECENT PROGRESS IN AGGLOMERATION AND PREHEATING OF GLASS BATCH
DARVIN, C
STEPHEN, PM
AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (09): : 927 - 927
[28] Leveraging waste heat potential in the glass industry
Milanesi, Sara
De Finis, Andrea
Glass International, 2024, 47 (03): : 63 - 66
[29] Can float glass cullet be used in the container Glass Industry?
Bertolin, Mario
Glass International, 2014, 37 (04): : 22 - 24
[30] New technique developed to measure glass batch, sort cullet
Craparo, JC
Weisberg, A
De Saro, R
AMERICAN CERAMIC SOCIETY BULLETIN, 2006, 85 (03): : 33 - 37

← 1 2 3 4 5 →