Automated Robotic System with Five Degrees of Freedom

被引：0
|
作者：
Ivanov, Sergei [1 ]
Zudilova, Tatiana [1 ]
Osetrova, Irina [1 ]
Anantchenko, Igor [1 ]
Mikalauskas, Andrei [1 ]
机构：
[1] ITMO Natl Res Univ ITMO Univ, St Petersburg, Russia
来源：
PROCEEDINGS OF THE 2019 25TH CONFERENCE OF OPEN INNOVATIONS ASSOCIATION (FRUCT) | 2019年
关键词：
SIMULATION;
D O I：
10.23919/fruct48121.2019.8981529
中图分类号：
TP3 [计算技术、计算机技术];
学科分类号：
0812 ;
摘要：
In paper develops and studies a mathematical model of an industrial robot with five degrees of freedom. The kinematic scheme of the robot is determined and the development of a mathematical model is performed using the matrix method and the Lagrange matrix dynamic equations. The study of the model is performed using the method of polynomial transformations. As a result of the analysis of the mathematical model, generalized coordinates, velocities and accelerations for the links of the robot are obtained. The spatial trajectory of the robot's gripper relative to the fixed base of the stand in the initial coordinate system is presented. The developed mathematical model of the robot allows you to determine the main dynamic characteristics of the robot, as well as the necessary generalized forces created by the drive links to move the robot's gripper to the selected point. This model allows the development of automated robotic systems and can be used in robot control systems with five degrees of freedom.
引用
收藏
页码：139 / 145
页数：7
相关论文
共 50 条
  • [31] Geometry of a five link mechanism with two degrees of freedom
    Tavkhelidze D.
    Mchedlishvili Z.
    [J]. Journal of Mathematical Sciences, 2013, 195 (4) : 560 - 568
  • [32] MODELING AND CONTROL CHARACTERISTICS FOR A 2-DEGREES-OF-FREEDOM COUPLING SYSTEM OF FLEXIBLE ROBOTIC ARMS
    FUKUDA, T
    ARAKAWA, A
    [J]. JSME INTERNATIONAL JOURNAL, 1987, 30 (267) : 1458 - 1464
  • [33] Development of a novel laser dual-axis five-degrees-of-freedom measuring system
    Jywe, W.
    Jeng, Y-R
    Liu, C-H
    Teng, Y-F
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2009, 223 (04) : 443 - 448
  • [34] Study and modeling of a Lego robotic arm with three degrees of freedom
    Guzman, Jaime A.
    Gutierrez, Andres F.
    Meza, Juan D.
    [J]. REVISTA DIGITAL LAMPSAKOS, 2011, (06): : 5 - 11
  • [35] A DISCRETE TRAJECTORY PLANNER FOR ROBOTIC ARMS WITH 6 DEGREES OF FREEDOM
    TAN, HH
    POTTS, RB
    [J]. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 1989, 5 (05): : 681 - 690
  • [36] BIFURCATION OF PERIODIC MOTION OF RIGID ROTOR BALL BEARING SYSTEM CONSIDERING FIVE DEGREES OF FREEDOM
    Cui, Li
    Liu, Changli
    Zheng, Jianrong
    [J]. 8TH IFTOMM INTERNATIONAL CONFERENCE ON ROTOR DYNAMICS (IFTOMM ROTORDYNAMICS 2010), 2010, : 441 - 445
  • [37] DESIGNING AND BUILDING A SERIAL ROBOTIC ARM WITH FOUR DEGREES OF FREEDOM
    Covaciu, Florin
    Iordan, Anca-Elena
    [J]. ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2019, 62 (02): : 317 - 322
  • [38] 6 Degrees of Freedom (DOF) Maritime Robotic Simulation Framework
    Tan, Kuan Meng
    Anvar, Amir
    Lu, Tien-Fu
    [J]. 11TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION, ROBOTICS AND VISION (ICARCV 2010), 2010, : 799 - 804
  • [39] Coordination of Intrinsic and Extrinsic Degrees of Freedom in Soft Robotic Grasping
    Erdogan, Can
    Schroeder, Armin
    Brock, Oliver
    [J]. 2018 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), 2018, : 4251 - 4256
  • [40] Motion coordination for industrial robotic systems with redundant degrees of freedom
    Vosniakos, George-Christopher
    Kannas, Zenon
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2009, 25 (02) : 417 - 431
12345