Experimental study on hot-air cold staking of PC, PC/ABS and acetal samples

被引：0
|
作者：
Yeh, HJ [1 ]
Schott, CL [1 ]
Park, JB [1 ]
机构：
[1] Edison Welding Inst, Columbus, OH 43212 USA
来源：
CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS | 1998年 / 44卷
关键词：
hot air; staking; polypropylene; ABS; joining; stud;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
An experimental evaluation to systematically study a hot air cold stake joining process was conducted with PC (reprocess), PC/ABS emd Acetal samples. Six material combinations consisting of three stud plate materials and matched with two hole plate materials (GDT 6400 and 18% talc filled PP) were used in the study. Seven stud designs with variations in size and geometry were used for each material combination. A proper heating temperature was first determined by heat characterization trials. Different heating times and stake heights were studied in the staking experiments. Pull tests were conducted to determine the strength of the joints and their failure mode. Results showed that material characteristics, material combinations, and process parameters all could contribute to variations in pull strength and different failure modes.
引用
收藏
页码：1078 / 1082
页数：5
相关论文
共 50 条
  • [21] Study and progress of power ultrasound in hot-air drying area
    Luo, D., 2013, Editor. Dept. of J. of the Chinese Cereals and Oils Assoc., No. 11 Baiwanzhuang Avenue, Xicheng District, Beijing, 100037, China (28)
  • [22] Comparative study on natural drying and hot-air drying of abalone
    Zhang, Yaqi
    Gao, Xin
    Xu, Jiachao
    Sun, Yan
    Chang, Yaoguang
    Xue, Changhu
    2008, Chinese Society of Agricultural Engineering, Beijing, 100026, China (24):
  • [23] Experimental relationship for impact strength of PC/ABS blend based on the Taguchi method
    Rafizadeh, M
    Morshedian, J
    Ghasemi, E
    Bolouri, A
    IRANIAN POLYMER JOURNAL, 2005, 14 (10) : 881 - 889
  • [24] Study on the splitting by hot-air drying of Camellia oleifera fruit
    Wang, Fenghe
    Liu, Zongxin
    Ding, Yechun
    Yang, Deyong
    INTERNATIONAL JOURNAL OF FOOD ENGINEERING, 2022, 18 (02) : 143 - 151
  • [25] An Experimental Study on the Surface De-Icing of FRP Plates via the External Hot-Air Method
    Li, Yan
    Zheng, Haotian
    Chi, Haodong
    Guo, Wenfeng
    Feng, Fang
    COATINGS, 2025, 15 (01):
  • [26] Experimental Investigation and Control of a Hot-Air Tunnel with Improved Performance and Energy Saving
    Navratil, Pavel
    Pekar, Libor
    Matusu, Radek
    Song, Mengjie
    Gao, Qingbin
    Kandala, Shanti S.
    Kadlcik, Ondrej
    ACS OMEGA, 2021, 6 (24): : 16194 - 16215
  • [27] Study on the Morphology of the PC/ABS Blend by High Shear Rate Processing
    Lee, Dong Uk
    Yong, Da Kyoung
    Lee, Han Ki
    Choi, Seok Jin
    Yoo, Jae Jung
    Lee, Hyung Ii
    Kim, Seon Hong
    Lee, Kee Yoon
    Lee, Seung Goo
    KOREAN CHEMICAL ENGINEERING RESEARCH, 2014, 52 (03): : 382 - 387
  • [28] Study of Surface Mechanical Characteristics of ABS/PC Blends Using Nanoindentation
    Bano, Saira
    Iqbal, Tanveer
    Ramzan, Naveed
    Farooq, Ujala
    PROCESSES, 2021, 9 (04)
  • [29] Modelling of microwave assisted hot-air drying and microstructural study of oilseeds
    Hemis, Mohamed
    Choudhary, Ruplal
    Becerra-Mora, Nathalie
    Kohli, Punit
    Raghavan, Vijaya
    INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 2016, 9 (06) : 167 - 177
  • [30] EXPERIMENTAL INVESTIGATION OF THE LOW CYCLE FATIGUE CRACK PROPAGATION IN PC/ABS POLYMER BLENDS
    Notomi
    Kishimoto
    ActaMechanicaSolidaSinica, 2001, 14 (04) : 344 - 348
12345