Research on Displacement Transfer Characteristics of a New Vibration-Isolating Platform Based on Parallel Mechanism

被引:2
|
作者
Shi Peicheng [1 ]
Shi Peilei [1 ]
Nie Gaofa [1 ]
Tang Ye [1 ]
Pan Daoyuan [1 ]
机构
[1] Anhui Polytech Univ, Coll Mech & Automot Engn, 54 Beijing Middle Rd, Wuhu City, Peoples R China
基金
中国国家自然科学基金;
关键词
STIFFNESS; DESIGN;
D O I
10.1155/2017/8743868
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Based on the parallel mechanism theory, a new vibration-isolating platform is designed and its kinetic equation is deduced. Taylor expansion is used to approximately replace the elastic restoring force expression of vibration-isolating platform, and the error analysis is carried out. The dynamic-displacement equation of the vibration-isolating platform is studied by using the Duffing equation with only the nonlinear term. The dynamic characteristics of the vibration-isolating platform are studied, including amplitude-frequency response, jumping-up and jumping-down frequency, and displacement transfer rate under base excitation. The results show that the lower the excitation amplitude, the lower the initial vibration isolation frequency of the system. The influence of the platform damping ratio.. on displacement transfer rate is directly related to the jumping-down frequency Omega(d) and the external excitation frequency. The vibration-isolating platform is ideally suited for high-frequency and small-amplitude vibrations.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] Stiffness and Strength Characteristics Research of a Vibration-Isolating Pipe Based on Modeling
    Sergaeva, M. Yu
    Strokov, I. M.
    Sergaev, A. A.
    OIL AND GAS ENGINEERING (OGE-2020), 2020, 2285
  • [2] Vibration-isolating assemblies based on standard elements
    Maliutin, A
    Myshinsky, E
    Sukhanov, S
    INTER-NOISE 96 - THE 1996 INTERNATIONAL CONGRESS ON NOISE CONTROL ENGINEERING, 25TH ANNIVERSARY CONGRESS - LIVERPOOL, PROCEEDINGS, BOOKS 1-6: NOISE CONTROL - THE NEXT 25 YEARS, 1996, : 1569 - 1572
  • [3] Research on Vibration Control of Seating System Platform Based on the Cubic Stewart Parallel Mechanism
    Bi, Fengrong
    Ma, Teng
    Wang, Xu
    Yang, Xiao
    Lv, Zhenpeng
    IEEE ACCESS, 2019, 7 : 155637 - 155649
  • [4] VIBRATION-ISOLATING BALL-TYPE CLUTCH AS A SOURCE OF INCREASED VIBRATION ACTIVITY IN THE SYSTEM: AMORTIZED MECHANISM - SHAFT LINE
    Kudryavtseva, Irina
    Rykov, Sergey A.
    Rykov, Sergey, V
    AKUSTIKA, 2021, 39 : 179 - 184
  • [5] Highly efficient uncertainty analysis of an integrated vibration-isolating metastructure based on global sensitivity
    Wang, Dongxian
    Zhao, Jianlei
    Zhao, Weijia
    Zhu, Rui
    Zhendong yu Chongji/Journal of Vibration and Shock, 2024, 43 (20): : 334 - 342
  • [6] Peculiarities of reducing the broadband transfer of vibration and working medium pulsation through vibration-isolating junctions of pipelines with liquid by constructive and active methods
    Kiryukhin, A. V.
    Milman, O. O.
    Ptakhin, A. V.
    Miloserdov, V. O.
    THERMOPHYSICS AND AEROMECHANICS, 2024, 31 (01) : 123 - 133
  • [7] Design of Control System for Vibration Isolation Platform Based on Parallel Mechanism
    Wang, Shuai
    Niu, Ruochen
    Li, Bing
    Huang, Hailin
    2017 IEEE 7TH ANNUAL INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (CYBER), 2017, : 1603 - 1608
  • [8] Vibration-isolating performance of cotton work gloves based on newly issued JIS T8114
    Shibata, Nobuyuki
    Maeda, Setsuo
    INDUSTRIAL HEALTH, 2008, 46 (05) : 477 - 483
  • [9] The Research of Platform Vibration Characteristics based on Numerical Wave Simulation
    Zhang, Huixia
    Huang, Weiqing
    Yang, Quan
    Lu, Long
    Tang, Wenxian
    Lyu, Sungki
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2014, 15 (03) : 471 - 475
  • [10] The research of platform vibration characteristics based on numerical wave simulation
    Huixia Zhang
    Weiqing Huang
    Quan Yang
    Long Lu
    Wenxian Tang
    Sungki Lyu
    International Journal of Precision Engineering and Manufacturing, 2014, 15 : 471 - 475