BARRIER PROPERTIES OF POLYPROPYLENE/POLY(M-XYLENE ADIPAMIDE) AND POLYPROPYLENE/POLY(ETHYLENE-CO-VINYL ALCOHOL) BLEND FILMS

被引:9
|
作者
Ozen, Ilhan [1 ]
Menceloglu, Yusuf Ziya [2 ]
机构
[1] Erciyes Univ, Dept Text Engn, Fac Engn, TR-38039 Melikgazi Kayseri, Turkey
[2] Sabanci Univ, Fac Engn & Nat Sci, Mat Sci & Engn Program, TR-34956 Orhanli, Tuzla Istanbul, Turkey
基金
美国国家科学基金会;
关键词
polypropylene; poly(ethylene-co-vinyl alcohol); poly(m-xylene adipamide); extrusion; oxygen gas permeability; MECHANICAL-PROPERTIES; LAMINAR MORPHOLOGY; POLY(ETHYLENE-TEREPHTHALATE); CRYSTALLIZATION; POLYPROPYLENE; PET; ORIENTATION; COMPATIBILIZATION; PERMEABILITY; TRANSPORT;
D O I
10.1177/8756087910397901
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The purpose of this study is to generate polypropylene (PP) blend films with improved oxygen gas and water vapor barrier properties, which are intended to be used in packaging applications. PP blend films containing 5 wt% ethylene vinyl alcohol (EVOH) or poly(m-xylene adipamide) (N-MXD6) were prepared, biaxially stretched, and characterized by employing differential scanning calorimeter, scanning electron microscope, oxygen gas and water vapor permeability analyzers. No barrier property improvement was observed, which is caused by the low amount of the dispersed phase used.
引用
收藏
页码:377 / 394
页数:18
相关论文
共 50 条
  • [41] Structure and properties of blends of poly(ethylene-co-vinyl alcohol) with poly(styrene-co-maleic anhydride)
    Tselios, C
    Bikiaris, D
    Prinos, J
    Panayiotou, C
    JOURNAL OF APPLIED POLYMER SCIENCE, 1997, 64 (05) : 983 - 999
  • [42] BLENDS OF CHLORINATED ISOTACTIC POLYPROPYLENE WITH POLY(ETHYLENE-CO-VINYL ACETATE) .1. EFFECT OF COMPONENT POLYMERS COMPOSITION ON THE BLEND MISCIBILITY
    LEE, SS
    CHUNG, KH
    KIM, KS
    JUNG, JC
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1988, 164 : 171 - 180
  • [43] Evaluation of mechanical properties and physical interactions of a ternary blend of poly(ethylene-co-octene)/poly(ethylene-co-vinyl acetate)/poly(vinyl chloride) in the molten state
    Francisquetti, Edson L.
    Pistor, Vinicios
    Fiorio, Rudinei
    Andrade, Mara Z.
    Zattera, Ademir J.
    Jacobi, Marly A. M.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 129 (03) : 1117 - 1123
  • [44] Synthesis and Characterization of Poly(ethylene-co-vinyl alcohol)-graft-poly(ε-caprolactone)
    Hongjin Jiang
    Junpo He
    Jieping Liu
    Yuliang Yang
    Polymer Journal, 2002, 34 : 682 - 686
  • [45] Synthesis and characterization of poly(ethylene-co-vinyl alcohol)-graft-poly(ε-caprolactone)
    Jiang, HJ
    He, JP
    Liu, JP
    Yang, YL
    POLYMER JOURNAL, 2002, 34 (09) : 682 - 686
  • [46] PROPERTIES OF INVERTASE IMMOBILIZED ON THE POLY(ETHYLENE-CO-VINYL ALCOHOL) HOLLOW FIBER MEMBRANE
    SHIOMI, T
    TOHYAMA, M
    SATOH, M
    MIYA, M
    IMAI, K
    BIOTECHNOLOGY AND BIOENGINEERING, 1988, 32 (05) : 664 - 668
  • [47] Transcarbamation between thermoplastic polyurethane and poly(ethylene-co-vinyl alcohol) during blend processing.
    Jiang, DD
    Storey, RF
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2001, 221 : U310 - U311
  • [48] RHEOLOGICAL PROPERTIES OF THERMOPLASTIC STARCH AND STARCH POLY(ETHYLENE-CO-VINYL ALCOHOL) BLENDS
    VILLAR, MA
    THOMAS, EL
    ARMSTRONG, RC
    POLYMER, 1995, 36 (09) : 1869 - 1876
  • [49] Investigation of morphological, rheological, and mechanical properties of cyclic olefin copolymer/poly(ethylene-co-vinyl acetate) blend films
    Durmus, Ali
    Alanalp, Mine B.
    Aydin, Ismail
    JOURNAL OF PLASTIC FILM & SHEETING, 2018, 34 (02) : 140 - 159
  • [50] Adhesion between poly(ethylene-co-vinyl alcohol) (EVA) and titanium
    Matsumura, K
    Hyon, SH
    Nakajima, N
    Peng, CY
    Iwata, H
    Tsutsumi, S
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2002, 60 (02): : 309 - 315