All-optical non-inverted half-subtracter, half-adder, comparator, and decoder simultaneously based on a single semiconductor optical amplifier

All-optical non-inverted half-subtracter, half-adder, comparator, and decoder are pointed out based on a single semiconductor optical amplifier. We have replaced the continuous wave probe light with the clock pulse sequences light, which guarantees the non-inverted code output. All-optical AND, NOR, XNOR, XOR, A . (B) over bar, and A . (B) over bar logic gates are realized by four-wave mixing and cross-gain modulation of SOA, which are used to drive half-subtracter, half-adder, comparator, and decoder with 10 Gb/s return-to-zero code. Extinction ratio (ER) and optical signal-to-noise ratio (OSNR) are improved by a depolarizer. Compared with no depolarizer, for A = B output of comparator, it corresponds to XNOR; ER and OSNR are improved by about 1 dB. For d(0) output of decoder, it corresponds to NOR; ER and OSNR are improved to 1.1 dB compared with the original value. However, for borrow of half-subtracter, greater than and less than of comparator, d(1) and d(2) of decoder, it corresponds to A . (B) over bar and A . (B) over bar; ER and OSNR show only slight deterioration about 0.4 dB. For carry of half-adder and d(3) of the decoder, it corresponds to AND; OSNR has hardly changed and ER has improved by about 2 dB. It has potential applications in more complex optical computing and optical signal processing systems. (C) 2021 Society of Photo-Optical Instrumentation Engineers (SPIE)