A Methodology for 2D Cutting Process Simulation of Solid End Mill

被引：0

作者：

Skrypka, Kateryna ^{[1
]}

Pittala, Gaetano ^{[2
]}

机构：

[1] Univ Trento, Dept Ind Engn, Via Sommarive 9, I-38123 Trento, Italy

[2] Sandvik Italia SpA, Coromant CDSE, Via Alle Fornaci 54, I-38068 Rovereto, Italy

来源：

PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) | 2017年 / 1896卷

关键词：

D O I：

10.1063/1.5008111

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The FEM simulation of end mill is complex, due to the three dimensional tool geometry. In this paper 2D FEM simulation, obtained with Thirdwave AdvantEdge v.7.0, was used in order to set up the material model. A proper machining test was designed in order to compensate the helix angle of the tool, in order to have 2D cutting forces. A mechanicistic model was developed in order to simulate, together with 2D FEM, the cutting forces in milling operation. A comparison with experimental cutting forces have been performed in order to validate the methodology.

引用

页数：6

共 50 条

[41] Modeling and simulation of 2D lithium-ion solid state battery
Bates, Alex
Mukherjee, Santanu
Schuppert, Nicholas
Son, Byungrak
Kim, Joo Gon
Park, Sam
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2015, 39 (11) : 1505 - 1518
[42] 2D Numerical simulation of supercritical phase conjugation of ultrasound in active solid
Matar, OB
Preobrazhensky, V
Pernod, P
2004 IEEE Ultrasonics Symposium, Vols 1-3, 2004, : 1627 - 1630
[43] A constant cutting force control for finishing process of die and mold by using a ball end mill
Nishida, S
Kakino, Y
Sudo, K
Ohtsuka, H
Yamaji, I
Ibaraki, S
PROGRESS OF MACHINING TECHNOLOGY, 2004, : 610 - 615
[44] Optimization of design for the high precision end mill spindles to improve stability of effective cutting process
Boddu, Jeevan Raju
Kotaiah, K. Rama
Chalapathi, P. Venkata
Shaik, Jakeer Hussain
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023, 19 (1): : 165 - 173
[45] THE CUTTING PERFORMANCE OF HIGH-SPEED STEEL END MILL PRODUCED BY SPRAY FORMING PROCESS
YABUUCHI, E
KUROSHIMA, Y
MASUDA, M
KUBOBUTI, M
IKAWA, Y
INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1993, 27 (04): : 327 - 332
[46] Optimal Layout Method of 2D Irregular Parts under Complex Cutting Process Constraints
Wu D.
Zhang S.
Yang G.
Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2023, 34 (21): : 2615 - 2621
[47] Cutting forces simulation of ball-end milling based on solid modeling
Ni, Qi-Min
Li, Cong-Xin
Ruan, Xue-Yu
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2001, 35 (07): : 1003 - 1007
[48] A novel 2D filter design methodology
Bouganis, CS
Constantinides, GA
Cheung, PYK
2005 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS), VOLS 1-6, CONFERENCE PROCEEDINGS, 2005, : 532 - 535
[49] A novel 2D filter design methodology
1600, Circuits and Systems Society, IEEE CASS; Science Council of Japan; The Inst. of Electronics, Inf. and Communication Engineers, IEICE; The Institute of Electrical and Electronics Engineers, Inc., IEEE (Institute of Electrical and Electronics Engineers Inc., United States):
[50] 2D elasto-plastic FE simulation of the drawbead drawing process
Yang, YY
Jin, ZH
Wang, RF
Wang, YZ
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 120 (1-3) : 17 - 20

← 1 2 3 4 5 →