An automated self-calibrated instrument for non-destructive testing on conductive materials

被引：0
|
作者：
Bernieri, A [1 ]
Betta, G [1 ]
Ferrigno, L [1 ]
Laracca, M [1 ]
机构：
[1] Univ Cassino, DAEIMI, I-03043 Cassino, Italy
来源：
IMTC/O3: PROCEEDINGS OF THE 20TH IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1 AND 2 | 2003年
关键词：
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
An instrument for non-destructive testing in industrial environment was designed, realized and tested. It uses fluxset magnetic sensors and is based on dedicated boards suitably realized for optimizing system performances without loosing in flexibility. A self-calibration and adjustment capability was implemented thus allowing a system optimum operating in any different environment. FFT based algorithm was used for both probe adjustment and measurement post processing. The realized instrument has then been tested on specimen with known cracks and the experimental results have been compared with the theoretical ones showing a very good agreement.
引用
收藏
页码：1269 / 1274
页数：6
相关论文
共 50 条
  • [1] An automated self-calibrated instrument for nondestructive testing on conductive materials
    Bernieri, A
    Betta, G
    Ferrigno, L
    Laracca, M
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2004, 53 (04) : 955 - 962
  • [2] Numerical technique for non-destructive testing of the conductive materials
    Bachorec, T.
    Jirku, T.
    Dedkova, J.
    PIERS 2007 BEIJING: PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM, PTS I AND II, PROCEEDINGS, 2007, : 736 - +
  • [3] Non-Destructive Testing for Cracks in Special Conductive Materials
    Dedkova, Jarmila
    INTELLIGENT COMPUTER TECHNIQUES IN APPLIED ELECTROMAGNETICS, 2008, 119 : 299 - 303
  • [4] NON-DESTRUCTIVE TESTING OF MATERIALS
    STANFORD, EG
    NATURE, 1956, 178 (4529) : 352 - 353
  • [5] PULSED EXCITATION IN EDDY CURRENT NON-DESTRUCTIVE TESTING OF CONDUCTIVE MATERIALS
    Smetana, M.
    Strapacova, T.
    Janousek, L.
    ADVANCES IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2008, 7 (1-2) : 326 - 329
  • [6] A multi-sensor probe for non-destructive testing on conductive materials
    Bernieri, A
    Betta, G
    Daeimi, LF
    IMTC 2002: PROCEEDINGS OF THE 19TH IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1 & 2, 2002, : 861 - 866
  • [7] ECT Probe Improvement for In-Service Non-Destructive Testing on Conductive Materials
    Bernieri, Andrea
    Betta, Giovanni
    Ferrigno, Luigi
    Laracca, Marco
    Rasile, Antonio
    2018 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC): DISCOVERING NEW HORIZONS IN INSTRUMENTATION AND MEASUREMENT, 2018, : 169 - 173
  • [8] NMR for non-destructive testing of materials
    Wolter, B
    Dobmann, G
    Bloem, PJC
    Lorentz, OK
    Greubel, D
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 4: CHARACTERIZATION AND PRODUCTION/DESIGN, 1997, : 135 - 138
  • [9] NON-DESTRUCTIVE TESTING OF MATERIALS WITH ULTRASOUND
    ESSER, KR
    UMSCHAU, 1985, 85 (12): : 746 - 749
  • [10] NON-DESTRUCTIVE TESTING OF MATERIALS AND STRUCTURES
    SEDDON, AE
    NATURE, 1956, 177 (4506) : 468 - 469
12345