STRUCTURE AND MECHANICAL PROPERTIES OF EXPLOSIVE WELDED Mg/Al BIMETAL

被引:8
|
作者
Balga, D. [1 ]
Ostroushko, D. [2 ]
Saksl, K. [1 ]
Mazancova, E. [2 ]
Milkovic, O. [3 ]
机构
[1] Slovak Acad Sci, Inst Mat Res, Kosice 04001, Slovakia
[2] Tech Univ Ostrava, Fac Met & Mat Engn, Ostrava 70833, Czech Republic
[3] Tech Univ Kosice, Fac Met, Kosice 04200, Slovakia
关键词
explosive welding; Mg/Al bimetal; micro-hardness; micro-diffraction; PETRA III;
D O I
10.2478/amm-2014-0270
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
In the article we analyzed shape, local mechanical properties, chemical and phase composition of Magnesium/Aluminium cladded material prepared by explosion welding. In particular we focus our investigation on Mg/Al interface and areas close to the joint. Hardness of the joined materials measured far from their interface is similar for both materials, however in the region of interface the hardness drops down by 40%. Phase transformations in the interface was examined by a hard X-ray micro-diffraction experiment performed at beamline P07 at PETRA III at the energy of 99 keV which helped us identify in Al: fcc-Al, Al2Cu tetragonal and Al7Cu2Fe tetragonal and in Mg: hcp-Mg, Mg2Si cubic phases. In the interface we haven't observed any new intermetallics, but computation of lattice parameters and profiles of Al and Mg peaks proved an existence of solid solution with different gradient of chemical composition.
引用
收藏
页码:1593 / 1597
页数:5
相关论文
共 50 条
  • [31] Mechanical Properties of Friction Stir Welded Cast Al-Mg-Sc Alloys
    Subbaiah, K.
    Geetha, M.
    Govindaraju, M.
    Rao, S. R. Koteswara
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2012, 65 (02) : 155 - 158
  • [32] Relationship between mechanical properties and microstructure of Al-Mg-Si and Al-Zn-Mg dissimilar welded joint
    Liu, C.-H. (chliu@hnu.edu.cn), 1600, Central South University of Technology (24):
  • [33] THEORETICAL AND EXPERIMENTAL ANALYSIS OF FORMABILITY OF EXPLOSIVE WELDED Mg/Al BIMETALLIC BARS
    Mroz, S.
    Szota, P.
    Bajor, T.
    Stefanik, A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (02) : 501 - 507
  • [34] Explosive properties of the Mg-Al/PTFE composition
    Zygmunt, Bogdan
    Hanneng Cailiao/Chinese Journal of Energetic Materials, 2007, 15 (06): : 592 - 596
  • [35] Process Parameters Optimization of the Explosive-Welded Al/Cu Bimetal in the Incremental Sheet Metal Forming Process
    Gheysarian, A.
    Honarpisheh, M.
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, 2019, 43 (Suppl 1) : 945 - 956
  • [36] Process Parameters Optimization of the Explosive-Welded Al/Cu Bimetal in the Incremental Sheet Metal Forming Process
    A. Gheysarian
    M. Honarpisheh
    Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2019, 43 : 945 - 956
  • [37] The microstructure and mechanical properties of friction stir welded Al-Zn-Mg alloy in as welded and heat treated conditions
    Singh, R. K. R.
    Sharma, Chaitanya
    Dwivedi, D. K.
    Mehta, N. K.
    Kumar, P.
    MATERIALS & DESIGN, 2011, 32 (02) : 682 - 687
  • [38] Study of the structure and properties of laser-welded joints of the Al–Mg–Li alloy
    N. B. Pugacheva
    N. P. Antenorova
    E. I. Senaeva
    The Physics of Metals and Metallography, 2015, 116 : 1259 - 1269
  • [39] Experimental Investigation of Microstructure and Mechanical Properties on Ultrasonic Welded Al-Mg Alloy Sheets
    Selvaraj, Sathishkumar
    Srirangarajalu, N.
    Kengachalam, Naveenkumar
    Pranaybabu, K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (04) : 975 - 985
  • [40] Microstructure and mechanical properties of refill friction stir spot welded dissimilar Mg/Al alloys
    Xu B.
    Dan C.
    He Z.
    Ji S.
    Lv Z.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (11): : 106 - 110