STRUCTURE AND MECHANICAL PROPERTIES OF EXPLOSIVE WELDED Mg/Al BIMETAL

被引:8
|
作者
Balga, D. [1 ]
Ostroushko, D. [2 ]
Saksl, K. [1 ]
Mazancova, E. [2 ]
Milkovic, O. [3 ]
机构
[1] Slovak Acad Sci, Inst Mat Res, Kosice 04001, Slovakia
[2] Tech Univ Ostrava, Fac Met & Mat Engn, Ostrava 70833, Czech Republic
[3] Tech Univ Kosice, Fac Met, Kosice 04200, Slovakia
关键词
explosive welding; Mg/Al bimetal; micro-hardness; micro-diffraction; PETRA III;
D O I
10.2478/amm-2014-0270
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
In the article we analyzed shape, local mechanical properties, chemical and phase composition of Magnesium/Aluminium cladded material prepared by explosion welding. In particular we focus our investigation on Mg/Al interface and areas close to the joint. Hardness of the joined materials measured far from their interface is similar for both materials, however in the region of interface the hardness drops down by 40%. Phase transformations in the interface was examined by a hard X-ray micro-diffraction experiment performed at beamline P07 at PETRA III at the energy of 99 keV which helped us identify in Al: fcc-Al, Al2Cu tetragonal and Al7Cu2Fe tetragonal and in Mg: hcp-Mg, Mg2Si cubic phases. In the interface we haven't observed any new intermetallics, but computation of lattice parameters and profiles of Al and Mg peaks proved an existence of solid solution with different gradient of chemical composition.
引用
收藏
页码:1593 / 1597
页数:5
相关论文
共 50 条
  • [1] Investigation of cold rolling influence on the mechanical properties of explosive-welded Al/Cu bimetal
    Asemabadi, M.
    Sedighi, M.
    Honarpisheh, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 144 - 149
  • [2] Influence of hot rolling on the interface microstructure and mechanical properties of explosive welded Mg/Al composite plates
    Dongya Wang
    Xiaoqing Cao
    Lifei Wang
    Miao Cao
    Wenxian Wang
    Journal of Materials Research, 2017, 32 : 863 - 873
  • [3] Influence of hot rolling on the interface microstructure and mechanical properties of explosive welded Mg/Al composite plates
    Wang, Dongya
    Cao, Xiaoqing
    Wang, Lifei
    Cao, Miao
    Wang, Wenxian
    JOURNAL OF MATERIALS RESEARCH, 2017, 32 (04) : 863 - 873
  • [4] Solidification processed Mg/Al bimetal macrocomposite: Microstructure and mechanical properties
    Paramsothy, M.
    Srikanth, N.
    Gupta, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 461 (1-2) : 200 - 208
  • [5] Influence of normalizing on microstructure and mechanical properties of Cu/Al explosive welded plate
    Zhou G.
    Ma H.
    Shen Z.
    Yang M.
    Chen P.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (06): : 46 - 51
  • [6] Mechanical Properties of Friction Stir Welded Mg/Mg- and Mg/Al-Joints
    Klag, Otmar
    Wagner, Guntram
    Eifler, Dietmar
    ADVANCED ENGINEERING MATERIALS, 2010, 12 (12) : 1212 - 1219
  • [7] Influence of Ni interlayer on microstructure and mechanical properties of laser welded joint of Al/Cu bimetal
    Yan, Shenghong
    Shi, Yan
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 59 (59) : 343 - 354
  • [8] Structure and properties of Al–Mg mechanical alloys
    Mirko Schoenitz
    Edward L. Dreizin
    Journal of Materials Research, 2003, 18 : 1827 - 1836
  • [9] Microstructure and mechanical properties of Al/Mg resistance element welded joints
    Bofang Zheng
    Yang Li
    Di Zhang
    Yue Yang
    Shuai Wang
    Sunusi Marwana Manladan
    Zhen Luo
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 6315 - 6323
  • [10] Microstructure and mechanical properties of Al/Mg resistance element welded joints
    Zheng, Bofang
    Li, Yang
    Zhang, Di
    Yang, Yue
    Wang, Shuai
    Manladan, Sunusi Marwana
    Luo, Zhen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (9-10): : 6315 - 6323