Polymer electrolytes based on sulfonated polysulfone for direct methanol fuel cells

This paper reports the development and characterization of sulfonated polysulfone (SPSf) polymer electrolytes for direct methanol fuel cells. The synthesis of sulfonated polysulfone was performed by a post sulfonation method using trimethyl silyl chlorosulfonate as a mild sulfonating agent. Bare polysulfone membranes were prepared with two different sulfonation levels (60%, SPSf-60 and 70%, SM-70), whereas, a composite membrane of SPSf-60 was prepared with 5 wt% silica filler. These membranes were investigated in direct methanol fuel cells (DMFCs) operating at low (30-40 degrees C) and high temperatures (100-120 degrees C). DMFC power densities were about 140 mW cm(-2) at 100 degrees C with the bare SPSf-60 membrane and 180 mW cm(-2) at 120 degrees C with the SPSf-60-SiO2 composite membrane. The best performance achieved at ambient temperature using a membrane with high degree of sulfonation (70%, SPSf-70) was 20 mW cm(-2) at atmospheric pressure. This makes the polysulfone-based DMFC suitable for application in portable devices. (c) 2008 Elsevier B.V. All rights reserved.