Effect of heat treatment on the property of CuInS2 thin film prepared by chemical bath deposition

被引:0
|
作者
Cui, Fangming [1 ]
Wang, Lei [1 ]
Chen, Xiongfei [1 ]
Sheng, Xia [1 ]
Yang, Deren [1 ]
Sun, Yun [2 ]
机构
[1] Zhejiang Univ, State Key Lab Silicon Mat, Hangzhou 310027, Peoples R China
[2] Nankai Univ, Tianjin 300071, Peoples R China
关键词
CuInS2; chemical bath deposition; thin film;
D O I
10.1117/12.792396
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
Uncrystallized copper indium disulphide (CuInS2) thin films have been deposited on ITO glass by chemical bath deposition (CBD) in acid conditions. Then polycrystalline CuInS2 films were obtained after sulfuration in sulfur atmosphere at 300 degrees C, 350 degrees C, 400 degrees C and 450 degrees C for 1.5 hours respectively. The films have been characterized by X-Ray diffraction (XRD), scanning electronic microscopy (SEM), precision surface profiler, energy dispersive X-ray analysis (EDX) and Hall effect measurement system. The results show that with the raising of heat treatment temperature the crystal degree and electrical property of the film are improved. Our work demonstrates the chemical bath deposition in acid conditions is a promising method for deposition of CuInS2 thin films for solar cells.
引用
收藏
页数:4
相关论文
共 50 条
  • [1] Characterization of CuInS2 thin films prepared by chemical bath deposition and their implementation in a solar cell
    Lugo, S.
    Lopez, I.
    Pena, Y.
    Calixto, M.
    Hernandez, T.
    Messina, S.
    Avellaneda, D.
    THIN SOLID FILMS, 2014, 569 : 76 - 80
  • [2] FACILE PREPARATION OF CuInS2 THIN FILMS VIA CHEMICAL BATH DEPOSITION AND VACUUM ANNEALING TREATMENT
    Wang, N. F.
    Chen, X. M.
    CHALCOGENIDE LETTERS, 2018, 15 (07): : 365 - 370
  • [4] Preparation and characterization of CuInS2 thin films for solar cells by chemical bath deposition
    Tang, HX
    Yan, M
    Zhang, H
    Ma, XY
    Wang, L
    Yang, DR
    CHEMICAL RESEARCH IN CHINESE UNIVERSITIES, 2005, 21 (02) : 236 - 239
  • [5] Effect of Ga incorporation in sequentially prepared CuInS2 thin film absorbers
    Neisser, A
    Hengel, I
    Klenk, R
    Matthes, TW
    Alvarez-García, J
    Pérez-Rodríguez, A
    Romano-Rodríguez, A
    Lux-Steiner, MC
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2001, 67 (1-4) : 97 - 104
  • [6] Chemical-bath ZnO buffer layer for CuInS2 thin-film solar cells
    Ennaoui, A
    Weber, M
    Scheer, R
    Lewerenz, HJ
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1998, 54 (1-4) : 277 - 286
  • [7] Fabrication and characterization of CuInS2 films by chemical bath deposition in acid conditions
    Fangming Cui
    Lei Wang
    Zhenqiang Xi
    Yun Sun
    Deren Yang
    Journal of Materials Science: Materials in Electronics, 2009, 20 : 609 - 613
  • [8] Fabrication and characterization of CuInS2 films by chemical bath deposition in acid conditions
    Cui, Fangming
    Wang, Lei
    Xi, Zhenqiang
    Sun, Yun
    Yang, Deren
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2009, 20 (07) : 609 - 613
  • [9] Characterization of CuInS2 thin films prepared by aerosol jet deposition
    Fan, Rong
    Kim, Dong Chan
    Jung, Sung Hee
    Um, Jae Ho
    Lee, Wan In
    Chung, Chee Won
    THIN SOLID FILMS, 2012, 521 : 123 - 127
  • [10] Formation of a ZnS/Zn(S,O) bilayer buffer on CuInS2 thin film solar cell absorbers by chemical bath deposition
    Baer, M.
    Ennaoui, A.
    Klaer, J.
    Kropp, T.
    Saez-Araoz, R.
    Allsop, N.
    Lauermann, I.
    Schock, H. -W.
    Lux-Steiner, M. C.
    JOURNAL OF APPLIED PHYSICS, 2006, 99 (12)