Weakly nonlinear analysis of localized bulging of an inflated hyperelastic tube of arbitrary wall thickness

被引:31
|
作者
Ye, Yang [1 ]
Liu, Yang [1 ]
Fu, Yibin [2 ]
机构
[1] Tianjin Univ, Dept Mech, Tianjin 300072, Peoples R China
[2] Keele Univ, Sch Comp & Math, Keele ST5 5BG, Staffs, England
基金
中国国家自然科学基金;
关键词
Localized bulging; Rubber tubes; Necking; Bifurcation; Nonlinear elasticity; FINITE DEFORMATIONS; ANEURYSM FORMATION; CYLINDRICAL MEMBRANES; ELASTIC MEMBRANES; STABILITY; BIFURCATION; INSTABILITY; PROPAGATION; CYLINDERS; SHELLS;
D O I
10.1016/j.jmps.2019.103804
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A weakly nonlinear analysis is conducted for localized bulging of an inflated hyperelastic cylindrical tube of arbitrary wall thickness. Analytical expressions are obtained for the coefficients in the amplitude equation despite the fact that the primary deformation is inhomogeneous and the incremental governing equations have variable coefficients. It is shown that for each value of wall thickness a localized bulging solution does indeed bifurcate sub-critically from the primary solution for almost all values of fixed axial force or fixed axial stretch for which the bifurcation condition is satisfied, as reported in all previous experimental studies, but there also exist extreme cases of fixed axial stretch for which localized bulging gives way to localized necking. Validation is carried out by comparing with results obtained under the membrane assumption and with fully numerical simulations based on Abaqus. It is shown that even for thin-walled tubes the membrane approximation becomes poorer and poorer as the tube is subjected to increasingly larger and larger axial stretch or force prior to inflation. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:16
相关论文
共 48 条
  • [41] Nonlinear dynamic analysis of Dα signals for type I edge localized modes characterization on JET with a carbon wall
    Cannas, Barbara
    Fanni, Alessandra
    Murari, Andrea
    Pisano, Fabio
    Abhangi, M.
    Abreu, P.
    Aftanas, M.
    Afzal, M.
    Aggarwal, K. M.
    Aho-Mantila, L.
    Ahonen, E.
    Aints, M.
    Airila, M.
    Albanese, R.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allan, P.
    Almaviva, S.
    Alonso, A.
    Alper, B.
    Alsworth, I.
    Alves, D.
    Ambrosino, G.
    Ambrosino, R.
    Amosov, V.
    Andersson, F.
    Andersson Sunden, E.
    Angelone, M.
    Anghel, A.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Apruzzese, G.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arnoux, G.
    Arshad, S.
    Ash, A.
    Asp, E.
    Asunta, O.
    Atanasiu, C. V.
    Austin, Y.
    Avotina, L.
    Axton, M. D.
    Ayres, C.
    Bachmann, C.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2018, 60 (02)
  • [42] Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory
    Gharooni, Hamed
    Ghannad, Mehdi
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, 2019, 50 (02): : 324 - 340
  • [43] ANALYSIS OF HEAT-TRANSFER, INCLUDING AXIAL FLUID CONDUCTION, FOR LAMINAR TUBE FLOW WITH ARBITRARY CIRCUMFERENTIAL WALL HEAT-FLUX VARIATION
    FAGHRI, M
    WELTY, JR
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1978, 21 (03) : 317 - 323
  • [44] Biomechanical Evaluation of the Effects of Implant Neck Wall Thickness and Abutment Screw Size: A 3D Nonlinear Finite Element Analysis
    Jeng, Ming-Dih
    Lin, Yang-Sung
    Lin, Chun-Li
    APPLIED SCIENCES-BASEL, 2020, 10 (10):
  • [45] Three-dimensional finite element analysis of effects of roller intervals on tool forces and wall thickness in stagger spinning of thin-walled tube
    Li, Yong
    Wang, Jin
    Lu, Guo-Dong
    Chen, Qi-Song
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2013, 227 (07) : 1429 - 1440
  • [46] On the formulation of a multi-layered composite pipe finite element with an arbitrary variable wall thickness-Part 1: Static postbuckling analysis with unstable large deformation
    Li, Tianyu
    OCEAN ENGINEERING, 2017, 141 : 405 - 417
  • [47] Manufacture of rolled products for 762-mm-DIAM. Cold-resistant conductor pipe having a wall thickness of 38.1 mm and an X56 strength rating; Analysis of the tube conversion for this product
    Matrosov, M. Yu.
    Efron, L. I.
    Nemtinov, A. A.
    Tomin, A. A.
    Golovin, S. V.
    Zaitsev, A. S.
    Shishov, A. A.
    Stepanov, P. P.
    METALLURGIST, 2007, 51 (5-6) : 268 - 274
  • [48] Manufacture of rolled products for 762-mm-diam. Cold-resistant conductor pipe having a wall thickness of 38.1 mm and an X56 strength rating; Analysis of the tube conversion for this product
    M. Yu. Matrosov
    L. I. Éfron
    A. A. Nemtinov
    A. A. Tomin
    S. V. Golovin
    A. S. Zaitsev
    A. A. Shishov
    P. P. Stepanov
    Metallurgist, 2007, 51 : 268 - 274