THE J-INTEGRAL FOR A SINGLE-EDGE CRACKED PANEL SUBJECTED TO COMBINED REMOTE TENSION AND BENDING

被引：0

作者：

Matsubara, Masaaki ^{[1
]}

机构：

[1] Gunma Univ, Gunma, Japan

来源：

ASME PRESSURE VESSELS AND PIPING CONFERENCE 2009, VOL 3: DESIGN AND ANALYSIS | 2010年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

On structural integrity evaluation, a single-edge cracked panel subjected to combined remote tension and bending is the typical one. The J-integral is a valid way for handling the ductile fracture problem immediately after stable crack initiation. The complimentary energy concept combined with fully plastic solutions to make it to estimate the J-integral of the panel. The proposed method is able to give us the J-integral as a function of the crack size/panel width and the strain hardening exponent.

引用

页码：287 / 291

页数：5

共 45 条

[31] On combination of the equivalent material concept and J-integral criterion for ductile failure prediction of U-notches subjected to tension
Majidi, H. R.
Golmakani, M. E.
Torabi, A. R.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (07) : 1476 - 1487
[32] THE PLANE-STRAIN GENERAL YIELDING OF SINGLE-EDGE NOTCHED PLATES DUE TO COMBINED BENDING AND AXIAL FORCE
SHIRATORI, M
DODD, B
FURUYA, M
RES MECHANICA, 1982, 4 (03): : 159 - 174
[33] Effect of Plate Width-Thickness Ratio on Elastic-Plastic J-integral of Semi-Elliptical Surface Cracked Plate under Tension: 1. Limitation of Existing J-integral Estimation Equation
Shin, Ji-Su
Gim, Jae-Min
Kim, Yun-Jae
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2020, 44 (10) : 717 - 723
[34] Development of Automated Model Generation and Analysis of Surface-Cracked Plates in Bending for Interpolated Elastic-Plastic J-Integral Solutions
Renfro, Michael W.
Allen, Phillip A.
Wilson, Christopher D.
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2020, 9 (05) : 646 - 665
[35] J-R curves from circumferentially through-wall-cracked pipe tests subjected to combined bending and tension - Part I: Theory and numerical simulation
Miura, N
Wilkowski, GM
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1998, 120 (04): : 406 - 411
[36] Approximate evaluation method for ductile fracture analysis of a circumferentially through-wall-cracked pipe subjected to combined bending and tension
Miura, N
NUCLEAR ENGINEERING AND DESIGN, 1999, 191 (02) : 177 - 194
[37] J-R curves from circumferentially through-wall-cracked pipe tests subjected to combined bending and tension - Part II: Experimental and analytical validation
Miura, N
Wilkowski, GM
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1998, 120 (04): : 412 - 417
[38] Elastic-plastic J integral calculation method for cracks in structures under combined tension and bending
Bai, Yong-Qiang
Wang, Tong
Lu, Liang-Hai
Sun, Liang
Shuai, Jian
Chen, Gang
Gongcheng Lixue/Engineering Mechanics, 2010, 27 (03): : 6 - 9
[39] TWO-PARAMETER J-A ESTIMATION FOR WELD CENTERLINE CRACKS IN WELDED SINGLE-EDGE CRACKED PLATE UNDER TENSILE LOADING
Duan, Chuanjie
Zhang, Shuhua
PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 3, 2019,
[40] FULLY-PLASTIC J AND CTOD SOLUTIONS FOR PIPES WITH CIRCUMFERENTIAL SURFACE CRACKS SUBJECTED TO COMBINED BENDING AND TENSION
Parise, Luis F. S.
Ruggieri, Claudio
OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 3: MATERIALS TECHNOLOGY, 2011, : 213 - 223

← 1 2 3 4 5 →