Design and Analysis of Horizontal Axial Flow Motor Shroud

被引：0
|
作者：
Wang, Shiming [1 ]
Shen, Yu [1 ]
机构：
[1] Shanghai Ocean Univ, Engn Coll, Shanghai 201306, Peoples R China
来源：
2017 3RD INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION (ESMA2017), VOLS 1-4 | 2018年 / 108卷
关键词：
ENERGY;
D O I：
10.1088/1755-1315/108/5/052016
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The wind turbine diffuser can increase the wind energy utilization coefficient of the wind turbine, and the addition of the shroud to the horizontal axis wind turbine also plays a role of accelerating the flow of the condensate. First, the structure of the shroud was designed and then modeled in gambit. The fluent software was used to establish the mathematical model for simulation. The length of the shroud and the opening angle of the shroud are analyzed to determine the best shape of the shroud. Then compared the efficiency with or without the shroud, through the simulation and the experiment of the water tank, it is confirmed that the horizontal axis of the shroud can improve the hydrodynamic performance.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Flow Analysis of Vortex Generators in the Shroud of a Horizontal Axis Wind Turbine
    Sharma, S.
    Anand, S.
    Das, Koushik
    ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018, 2020, : 51 - 64
  • [2] Design and Analysis of a Novel Bearingless Motor for a Miniature Axial Flow Blood Pump
    Zad, Haris Sheh
    Khan, Talha Irfan
    Lazoglu, Ismail
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2018, 65 (05) : 4006 - 4016
  • [3] Optimized shroud design for axial turbine aerodynamic performance
    Porreca, L.
    Kalfas, A. I.
    Abhari, R. S.
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2008, 130 (03):
  • [4] Optimized shroud design for axial turbine aerodynamic performance
    Porreca, L.
    Kalfas, A. I.
    Abhari, R. S.
    Proceedings of the ASME Turbo Expo 2007, Vol 6, Pts A and B, 2007, : 803 - 815
  • [5] Fluid flow analysis and design of a shroud for wind turbine using ANSYS
    Toya, H.
    Kusakabe, T.
    Yuji, T.
    2007 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-4, 2007, : 1528 - +
  • [6] SHROUD LEAKAGE MODELING OF THE FLOW IN A TWO STAGE AXIAL TEST TURBINE
    Pau, M.
    Cambuli, F.
    Mandas, N.
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 6, PT A, 2008, : 1333 - 1343
  • [7] Aerodynamic impact of hub and shroud leakage flow on an axial turbine stage
    Liu, Huoxing
    An, Yuge
    Zou, Zhengping
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (14) : 2483 - 2495
  • [8] Transient flow analysis for horizontal axial down-wind turbine
    Tsai, Gwo-Chung
    Wang, Yi-Ta
    Li, Wei-Shiue
    ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5, 2013, 634-638 : 3821 - 3824
  • [9] Investigation of flow in axial turbine stage without shroud-seal
    Straka, Petr
    Nemec, Martin
    Jelinek, Tomas
    EFM14 - EXPERIMENTAL FLUID MECHANICS 2014, 2015, 92
  • [10] Design and Analysis of Modular Axial Flux Switched Reluctance Motor
    Shiwakoti, Rochak
    Poudel, Bikrant
    Amiri, Ebrahim
    Divandari, Mohamad
    Damaki, Aliakbar
    2019 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2019, : 1521 - 1525
12345