Study on microstructure and mechanical properties of spark plasma sintered Alumix 431 powder

被引：9

作者：

Garbiec, D. ^{[1
]}

Siwak, P. ^{[2
]}

机构：

[1] Metal Forming Inst, 14 Jana Pawla II St, PL-61139 Poznan, Poland

[2] Poznan Univ Tech, Inst Mech Technol, 3 Piotrowo St, PL-60965 Poznan, Poland

来源：

POWDER METALLURGY | 2016年 / 59卷 / 04期

关键词：

Alumix; 431; Aluminium alloy; Spark plasma sintering; Microstructure; Mechanical properties; ALLOYS;

D O I：

10.1080/00325899.2016.1169362

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Spark plasma sintering (SPS) has been used to successfully densify a 7075 aluminium alloy obtained from Alumix 431 powder. Sintering experiments were conducted at the temperature of 450 and 500 degrees C for 2.5, 5 and 10 min. All the presented results confirm the excellent sinterability of Alumix 431 powder in vacuum during the SPS process and clearly show the effect of sintering temperatures and holding times on the densification, microstructure and mechanical properties of the obtained sintered compacts. The best results of hardness (1412 +/- 39 MPa), tensile strength (345 +/- 15 MPa) and compressive strength (618 +/- 4 MPa) were obtained by the compacts sintered at 500 degrees C for 5 min.

引用

页码：242 / 248

页数：7

共 50 条

[31] Microstructure, Mechanical Properties, and Sliding Wear Behavior of Spark Plasma Sintered Ti-Cu Alloys
Dong, Rui
Zhu, Weiwei
Zhao, Cancan
Zhang, Yiwen
Ren, Fuzeng
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (12): : 6147 - 6160
[32] Microstructure, Mechanical Properties, and Sliding Wear Behavior of Spark Plasma Sintered Ti-Cu Alloys
Rui Dong
Weiwei Zhu
Cancan Zhao
Yiwen Zhang
Fuzeng Ren
Metallurgical and Materials Transactions A, 2018, 49 : 6147 - 6160
[33] Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C
Li, Chenran
Li, Shuang
An, Di
Xie, Zhipeng
CERAMICS INTERNATIONAL, 2020, 46 (08) : 10142 - 10146
[34] Densification, microstructure and mechanical properties of spark plasma sintered Ni-17%Cr binary alloys
Bukola Joseph Babalola
Mxolisi Brendon Shongwe
Babatunde Abiodun Obadele
Peter Apata Olubambi
The International Journal of Advanced Manufacturing Technology, 2019, 101 : 1573 - 1581
[35] Microstructure and mechanical properties of spark plasma sintered zirconia-hydroxyapatite nano-composite powders
Kumar, R
Prakash, KH
Cheang, P
Khor, KA
ACTA MATERIALIA, 2005, 53 (08) : 2327 - 2335
[36] Comparisons of the densification, microstructure and mechanical properties of boron carbide sintered by hot pressing and spark plasma sintering
Zhang, Xiaorong
Zhang, Zhixiao
Wen, Ruolin
Wang, Guangshuo
Zhang, Xiaoliang
Mu, Jingbo
Che, Hongwei
Wang, Weimin
CERAMICS INTERNATIONAL, 2018, 44 (02) : 2615 - 2619
[37] Microstructure and Mechanical Properties of Spark Plasma Sintered CoCrFeNiNbX High-Entropy Alloys with Si Addition
Karlik, Miroslav
Prusa, Filip
Kratochvil, Petr
Thurlova, Hana
Strakosova, Angelina
Cech, Jaroslav
Capek, Jiri
Vronka, Marek
Cabibbo, Marcello
Ekrt, Ondrej
MATERIALS, 2023, 16 (06)
[38] Mechanical properties and microstructure of spark plasma sintered nanostructured p-type SiGe thermoelectric alloys
Bathula, Sivaiah
Jayasimhadri, M.
Dhar, Ajay
MATERIALS & DESIGN, 2015, 87 : 414 - 420
[39] Magnetic microstructure and magnetic properties of spark plasma sintered NdFeB magnets
Huang, Y. L.
Wang, Y.
Hou, Y. H.
Wang, Y. L.
Wu, Y.
Ma, S. C.
Liu, Z. W.
Zeng, D. C.
Tian, Y.
Xia, W. X.
Zhong, Z. C.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2016, 399 : 175 - 178
[40] Effect of doping (Mg,Mn,Zn) on the microstructure and mechanical properties of spark plasma sintered hydroxyapatites synthesized by mechanical alloying
Lala, S.
Maity, T. N.
Singha, M.
Biswas, K.
Pradhan, S. K.
CERAMICS INTERNATIONAL, 2017, 43 (02) : 2389 - 2397

← 1 2 3 4 5 →