Advanced Organic Polymer for the Aggressive Scaling of Low-k Materials

被引：12

作者：

Pantouvaki, Marianna ^{[1
]}

Huffman, Craig ^{[1
]}

Zhao, Larry ^{[2
]}

Heylen, Nancy ^{[1
]}

Ono, Yukiharu ^{[3
]}

Nakajima, Michio ^{[3
]}

Nakatani, Koji ^{[3
]}

Beyer, Gerald P. ^{[1
]}

Baklanov, Mikhail R. ^{[1
]}

机构：

[1] IMEC, B-3001 Louvain, Belgium

[2] IMEC, INTEL, B-3001 Louvain, Belgium

[3] Sumitomo Bakelite Co Ltd, Yokohama, Kanagawa 2450052, Japan

来源：

JAPANESE JOURNAL OF APPLIED PHYSICS | 2011年 / 50卷 / 04期

关键词：

D O I：

10.1143/JJAP.50.04DB01

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

An advanced organic polymer material of k = 2.2 has been successfully integrated in Cu lines with dielectric spacing from 80 to 20 nm. Cu lines with both TaN/Ta barrier and no barrier were fabricated. Current-voltage (I-V) and time dependent dielectric breakdown (TDDB) measurements were performed to study the scalability of this material. In the case of TaN/Ta barrier, no TDDB degradation was observed at 100 degrees C as the dielectric spacing changed from 80 to 30 nm. In the case of no barrier, TDDB performance at 100 degrees C was better than that of SiO2 without a barrier. However, TDDB at 200 degrees C showed a clear degradation. In contrast, no such degradation was present when TaN/Ta barrier was used. (C) 2011 The Japan Society of Applied Physics

引用

页数：5

共 50 条

[41] Optical characteristics and UV modification of low-k materials
Marsik, Premysl
Baklanov, Mikhail R.
2008 9TH INTERNATIONAL CONFERENCE ON SOLID-STATE AND INTEGRATED-CIRCUIT TECHNOLOGY, VOLS 1-4, 2008, : 765 - 768
[42] Anisotropic elastic properties of low-k dielectric materials
Maznev, AA
Mazurenko, A
Alper, G
Moore, CJL
Gostein, M
MATERIALS, TECHNOLOGY AND RELIABILITY FOR ADVANCED INTERCONNECTS AND LOW-K DIELECTRICS-2004, 2004, 812 : 67 - 72
[43] Options for CVD of dielectrics include low-k materials
Baliga, John
Semiconductor International, 1998, 21 (06): : 139 - 140
[44] Plasma and UV assisted Rapidcuring™ of low-k materials
Waldfried, C
Margolis, A
Escorcia, O
Han, Q
Albano, R
Berry, I
RAPID THERMAL AND OTHER SHORT-TIME PROCESSING TECHNOLOGIES III, PROCEEDINGS, 2002, 2002 (11): : 53 - 61
[45] Moisture induced degradation of porous low-k materials
Baklanov, Mikhail R.
O'Dwyer, David
Urbanowicz, Adam M.
Le, Quoc Toan
Demuynck, Steven
Hong, Eun Kee
MATERIALS, TECHNOLOGY AND RELIABILITY OF LOW-K DIELECTRICS AND COPPER INTERCONNECTS, 2006, 914 : 381 - +
[46] Novel low-k dielectrics based on DLC materials
Grill, A
Patel, V
Jahnes, C
PROCEEDINGS OF THE FIFTH INTERNATIONAL SYMPOSIUM ON DIAMOND MATERIALS, 1998, 97 (32): : 512 - 520
[47] Low-k materials for DRAM: Characterization and integration challenges
Cigal, JC
Thies, A
Klipp, A
Advanced Metallization Conference 2005 (AMC 2005), 2006, : 239 - 243
[48] Low-k materials patternable in environmentally friendly solvents
Murotani, Eisuke
Lee, Jin Kyun
Chatzichristidi, Margarita
Zakhidov, Alexander A.
Taylor, Priscilla G.
Ober, Christopher K.
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2009, 237
[49] Low-k dielectric family introduced by SBA Materials
Garrou, Philip
SOLID STATE TECHNOLOGY, 2010, 53 (10) : 10 - 11
[50] The effects of plasma exposure on low-k dielectric materials
Shohet, J. L.
Ren, H.
Nichols, M. T.
Sinha, H.
Lu, W.
Mavrakakis, K.
Lin, Q.
Russell, N. M.
Tomoyasu, M.
Antonelli, G. A.
Engelmann, S. U.
Fuller, N. C.
Ryan, V.
Nishi, Y.
ADVANCED ETCH TECHNOLOGY FOR NANOPATTERNING, 2012, 8328

← 1 2 3 4 5 →