An arbitrary Lagrangian-Eulerian finite element method for solving three-dimensional free surface flows

被引:52
|
作者
Soulaimani, A
Saad, Y
机构
[1] Ecole Technol Super, Dept Genie Mecan, Montreal, PQ H3C 1K3, Canada
[2] Univ Minnesota, Dept Comp Sci, Minneapolis, MN 55455 USA
基金
加拿大自然科学与工程研究理事会; 美国国家航空航天局;
关键词
D O I
10.1016/S0045-7825(97)00330-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper discusses numerical solution of unsteady three-dimensional free surface flows. The governing equilibrium equations are written in the framework of the Arbitrary Lagrangian-Eulerian kinematic description. The corresponding variational formulation is established afterwards. Since the variational problems are nonlinear with respect to the moving coordinates, a second-order approximate variational problem is derived after a consistent linearization of the referential motion. Stability of the discrete formulations is ensured with the help of a new stabilization method. A robust preconditioned GMRES algorithm is then used to solve the resulting set of nonlinear equations. Finally, the computational algorithms are assessed through numerical studies of various problems: a large sloshing Row in a three-dimensional reservoir, a discharge Row from a reservoir, simulation of a liquid vortex produced inside a cylindrical container with a disk rotating at the bottom and a three-dimensional practical hydraulic problem. (C) 1998 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:79 / 106
页数:28
相关论文
共 50 条
  • [41] Adaptive coupled arbitrary Lagrangian-Eulerian finite element and meshfree method for injection molding process
    Li, Xikui
    Duan, Qinglin
    Han, Xianhong
    Sheng, D. C.
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2008, 73 (08) : 1153 - 1180
  • [42] On friction modeling in orthogonal machining: An Arbitrary Lagrangian-Eulerian finite element model
    Haglund, AJ
    Kishawy, HA
    Rogers, RJ
    [J]. Transactions of the North American Manufacturing Research Institution of SME 2005, Vol 33, 2005, 2005, 33 : 589 - 596
  • [43] ARBITRARY LAGRANGIAN-EULERIAN THERMOMECHANICAL FINITE-ELEMENT MODEL OF MATERIAL CUTTING
    RAKOTOMALALA, R
    JOYOT, P
    TOURATIER, M
    [J]. COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, 1993, 9 (12): : 975 - 987
  • [44] Mesh-moving arbitrary Lagrangian-Eulerian three-dimensional technique applied to sloshing problems
    Battaglia, Laura
    Lopez, Ezequiel J.
    Cruchaga, Marcela A.
    Storti, Mario A.
    D'Elia, Jorge
    [J]. OCEAN ENGINEERING, 2022, 256
  • [45] FINITE ELEMENT MODELING OF OBLIQUE MACHINING USING AN ARBITRARY LAGRANGIAN-EULERIAN FORMULATION
    Llanos, I.
    Villar, J. A.
    Urresti, I.
    Arrazola, P. J.
    [J]. MACHINING SCIENCE AND TECHNOLOGY, 2009, 13 (03) : 385 - 406
  • [46] Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian-Eulerian finite-element method
    Movahhedy, M
    Gadala, MS
    Altintas, Y
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 103 (02) : 267 - 275
  • [47] A novel arbitrary Lagrangian-Eulerian finite element method for a parabolic mixed parabolic moving interface problem
    Lan, Rihui
    Sun, Pengtao
    [J]. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, 2021, 383
  • [48] Numerical Simulation of Vortex-Induced Vibration with Three-Step Finite Element Method and Arbitrary Lagrangian-Eulerian Formulation
    Tang, Guoqiang
    Lu, Lin
    Teng, Bin
    Liu, Mingming
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2013,
  • [49] Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian-Eulerian formulation
    Boman, R
    Ponthot, JP
    [J]. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2004, 193 (39-41) : 4323 - 4353
  • [50] A combined Element-Free Galerkin method/arbitrary Lagrangian-Eulerian formulation for dynamic crack propagation
    Ponthot, JP
    Belytschko, T
    [J]. IUTAM SYMPOSIUM ON NON-LINEAR SINGULARITIES IN DEFORMATION AND FLOW, PROCEEDINGS, 1999, : 205 - 216