Influence of geometrical parameters on the strength of Hybrid CFRP-aluminium tubular adhesive joints

被引：11

作者：

Lavalette, Nicolas P. ^{[1
]}

Bergsma, Otto K. ^{[1
]}

Zarouchas, Dimitrios ^{[1
]}

Benedictus, Rinze ^{[1
]}

机构：

[1] Delft Univ Technol, Fac Aerosp Engn, Dept Aerosp Struct & Mat, Kluyverweg 1, NL-2629 HS Delft, Netherlands

来源：

COMPOSITE STRUCTURES | 2020年 / 240卷

关键词：

Adhesive joints; Tubular joints; Hybrid joints; Ductile adhesives; Cohesive zone modelling; Mechanical testing; BONDED JOINTS; LAP JOINTS; NUMERICAL SIMULATIONS; SINGLE; OPTIMIZATION; THICKNESS; STRESSES; BEHAVIOR;

D O I：

10.1016/j.compstruct.2020.112077

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Tubular adhesive joints, used in truss structures to join pultruded carbon fibre-reinforced polymer members to aluminium nodes, are modelled with varying dimensions. The numerical model uses a Cohesive Zone Modelling formulation with a trapezoidal traction-separation law for the adhesive layer, and experimental tests are carried to validate it. The results showed that the joint strength increases significantly with the bonding area, with a limit on the overlap length above which it stops increasing. This upper limit is affected by the thickness and tapering angle of the adherends, due to their influence on the shear stress distribution along the overlap. On the other hand, the adhesive thickness has only a marginal influence on the joint strength.

引用

下载

页数：11

共 50 条

[21] Strength prediction of tubular composite adhesive joints under torsion
Oh, Je Hoon
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (7-8) : 1340 - 1347
[22] Effect of surface energy on the shear strength of cfrp/steel adhesive joints
Hu, Yefa
Tong, Shitan
Zhang, Jinguang
Xia, Xu
Wen, Xianglong
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2023, 11 (03)
[23] Influence of geometrical and installation parameters on performance of CFRP anchors
Villanueva Llaurado, Paula
Fernandez-Gomez, Jaime
Gonzalez Ramos, Francisco J.
COMPOSITE STRUCTURES, 2017, 176 : 105 - 116
[24] The influence of curing conditions on the strength of adhesive joints
Rudawska, Anna
JOURNAL OF ADHESION, 2020, 96 (1-4): : 402 - 422
[25] THE INFLUENCE OF LOCAL GEOMETRY ON THE STRENGTH OF ADHESIVE JOINTS
ADAMS, RD
HARRIS, JA
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1987, 7 (02) : 69 - 80
[26] Influence of Surface Treatment on the Strength of Adhesive Joints
Doluk, Elzbieta
Rudawska, Anna
Stancekova, Dana
Mrazik, Jozef
MANUFACTURING TECHNOLOGY, 2021, 21 (05): : 585 - 591
[27] Strength characteristics analysis and unified model establishment of bonded, riveted, and adhesive-rivet hybrid CFRP joints
Yang, Long
Yang, Guangwu
Yu, Dalian
Jiang, Lanxin
Chen, Dongdong
Yuan, Yuqing
Xu, Weifeng
Engineering Structures, 2025, 322
[28] Influence of Processing Parameters on the Strength of Air Brazed Alumina Joints Using Aluminium Interlayer
A. Ibrahim
F. Hasan
Journal of Materials Science & Technology, 2011, 27 (07) : 641 - 646
[29] Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints
Akman, Erhan
Erdogan, Yalcin
Bora, Mustafa Ozgur
Coban, Onur
Oztoprak, Belgin Genc
Demir, Arif
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, 98
[30] EFFECT OF ADHESIVE THICKNESS ON THE STRENGTH OF ADHESIVE BONDED JOINTS OF TUBULAR METAL SHAFTS WITH COUPLING.
Sugibayashi, Toshio
Matsuo, Keizo
Habuto, Yoshiro
Ikegami, Kozo
Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1988, 54 (498): : 273 - 278

← 1 2 3 4 5 →